0
bobbin case
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
How do you thread a Sears Kenmore model 158.14001?
Take the thread through the first thread guide which is on the right, then through the needle guide notch. Wind the thread around the tension dial and pull up to the left of the dial. Pull the thread into the thread guide at the bottom. Take the thread from front to back through the needle eye.
What does the thread guide do on the sewing machine?
The thread guide keeps the thread running in the proper place. If the thread is not threaded correctly, the tension will be off, resulting in jammed or broken threads in the machine.On a sewing machine, the thread guide is a small part that is attached above the needle. It looks like a hook and it hold the thread in place as it is fed through the needle.
How do you thread a universal sewing machine model kat?
The thread must come from the FRONT of the upright spool on the back of the machine. Thread through the small eyelet on the back (nearest the spool(s), projecting from the top), then through the thread guide at the front of the machine. If you are using a double needle (therefore two spools of thread), the thread from the left-hand spool should go through the top hole and the thread from the right-hand spool through the bottom hole. Come down to the tension disks. Bring the thread through the back disk, up again under the wire guide, and down under the thread guide that is just to the left of the tension disks. Bring the thread through the eye of the take-up lever (the piece that moves up and down when you sew) from RIGHT to LEFT. Guide the thread back down through the thread guide next to the tensioner. There is a little thread guide just inside the door on the left side of the machine; bring the thread through this guide. Then pull the thread through the wire guide above the needle (it's easiest to hold the thread horizontally to do this). Thread the needle front to back. HTH. YMMV.
What is the meaning and function of thread guide?
Thread guides lead the thread in this order: Thread Spool to Tension Discs to Take-Up Lever to Needle. A machine is threaded with the take-up lever in its highest position and the presser bar lifted. Generally, the thread guides provide a path that keeps the thread from crossing over itself. From the spool, any thread guides mounted on the top cover are first, back to front. On the face plate (front of machine) any thread guides that sit to the right of the tension discs are threaded before inserting thread around & between the discs. If there be any thread guide that is BOTH to the left of the tension discs AND right of the take up lever, the thread would go there next. My fairly typical Japanese Zigzag Machine does not have a thread guide between the tension discs and the take-up lever, but if there were one, I would call it the "Tension to Take-Up Lever Thread Guide." From there the thread passes right-to left through the hole of the take up lever, and then down through all thread guides mounted to the left of the take-up lever. Lastly, the thread goes down through a needle clamp thread guide and through the eye of the needle. Not a short answer, but I hope it addresses your question.
What is the function of the thread guide on the sewing machine?
The thread guide keeps the thread going straight in one direction.
What is a thread guide?
A thread guide is a tool to measure the number and pitch of threads on a bolt
Another name for a thread guide is?
Yarn guide / Wire guide
What is the function of the thread guides on the sewing machine?
The thread guide keeps the thread going straight in one direction.
What does upper thread guide mean?
The upper thread guide on a sewing machine is the markings on a sewing machine which show you how to thread the machine. It's usually indicated with arrows, dashes, and numbers, giving you step by step guides to thread the sewing machine properly.
How do you re thread Toyota 4 thread differential feed overlocker?
Use the manual or the colour coded threading guide that is inside the front part of the overlocker. Simply pull down the compartment flap where the 'Toyota' logo is and you should see the small diagram. Followed carefully, it's quite easy to re-thread each looper & needle(s). Hope this helps!
Is there a convenient guide to follow when selecting laptop stands?
Yes, there are guides available, one being http://www.notebookforums.com/forum/thread/207013/definitive-thread-guide-to-laptop-stands-for-17-laptops.
How do you thread Elna 1500 sewing machine?
First, raise the presser foot lever and turn the flywheel towards you to raise the thread take-up lever to its highest point. Next,, place your spool of thread on the horizontal post and hold in place with the spool cap. You know that little nick in the spool where you tuck your thread so the spool won't unravel? Make sure that nick is pointing to the right. Now draw your thread to the left and "click" it into the little silver loop. A 1" oval thread guide sits to the left of that silver loop; draw your thread around the left of the thread guide. Now you're going to loop your thread through the tension discs. You'll see two "cracks" in your machine. First run your thread DOWN through the RIGHT crack, then immediately UP through the LEFT crack. At the top of the LEFT crack is your silver thread take-up lever. This is probably the trickiest part of threading your machine because the lever is always kind of inside the machine. But you can do it! Pass your thread from RIGHT to LEFT through the back of the loop at the top of the silver lever. Whew! We're almost there. Now draw your thread right back down the same crack you pulled it up before. You now have two stationary guides above your needle. Pass it through the thick silver guide and then through the thin silver guide. Both of these moves are kind of a left-to-right motion. Now thread your needle from FRONT to BACK. You're done -- well, except for the bobbin. Hold your bobbin spool above the bobbin case so that it looks like a letter "P" Draw the bobblin thread from RIGHT to LEFT through the small crack in the silver part of the bobbin case, then pull the thread straight toward the back of the machine. Now turn your flywheel one revolution toward you so that your upper thread picks up the bobbin thread. Now close your bobbin cover, and SEW! Congratulations! You did it!
