Want this question answered?
it might have to be pressed in with a machine call and ask people
Remove the cover. Under the cover there is a C-clip. Remove it and the rest comes out.
Remove the tire and wheel from your Chevy Lumina. Remove the end of the axle. Remove the wheel bearing nut. Remove the wheel bearing seal and the wheel bearing. Reverse the process to install the new front wheel bearing.
You don't
Engages automatic locking hubs on for wheels drives with automatic hubs.
Remove the tire and wheel from your 2004 Mercedes 240. Remove the end of the axle. Remove the wheel bearing nut. Remove the wheel bearing seal and the wheel bearing.
Remove the tire and wheel from your 2001 Chevy Impala. Remove the end of the axle. Remove the wheel bearing nut. Remove the wheel bearing seal and the wheel bearing. Reverse the process to install the new front wheel bearing.
Do you have automatic locking hubs on the front axles?
Remove the tire and wheel. Remove the axle end cap. Remove the wheel bearing retaining nut. Remove the wheel bearing seal. Remove the wheel bearing. Reverse the process to install the new wheel bearing.
The front wheel bearings are a sealed bearing. You will have to remove the hub from the spindle, remove the lock ring (aka C clip), and press out the bearing. Installation is in reverse order but with a new bearing. YOU WILL NEED A SHOP PRESS TO REMOVE THE BEARING AND THE BEARING RACES.
Remove the auto lock hub cover then the circlip which holds the auto lock mechanisim make sure you keep this clean you should then see a large locking ring with multiple holes in it and also 3 screws remove the screws then the ring, the ring behind the locking ring should then be turned clock wise to tighten the wheel bearing be sure not to over tighten it then refit the mechanisim and wheel and check the play has been removed
To replace the front wheel bearing on a Ford Fiesta, you will need to remove the wheel. Then with a hammer you can pull the old bearing out.