I think the bolt is a 10mm then pull it out. Have not had many problems with the 6.0 cam sensor like the 7.3L
Can someone anyone please tell me where is the Crankshaft Positioning Sensor on a kia sorento 2005 and I also need a diagram
98 Hyundai crankshaft positioning sensor location
APPS.... Accelerator Pedal Position Sensor. Its the same thing as a TPS, throttle positioning sensor.
there are many different things that it could be check the camshaft positioning sensor, the throttle positioning sensor, and the crankshaft positioning sensor.
The throttle positioning sensor is located in the throttle body.
To change the camshaft positioning sensor on a 98 GMC Jimmy you need to first locate it. The sensor is located within the distributor. Next, unbolt the old sensor and replace with a new sensor.
A 1997 Dodge with a Cummins diesel does not have an oxygen sensor.A 1997 Dodge with a Cummins diesel does not have an oxygen sensor.
on the throttle body.
Yes, Have them check the camshaft sensor....
Here is a link... With pictures of throttle positioning sensor... http://www.thepartsbin.com/repsite/ford~throttle_position_sensor~reparts.html
To replace the crankshaft positioning sensor on a 1989 Ford Sho Taurus, go near the water pump at the front of the car and remove components that block access to the sensor. Remove the two bolts holding the sensor in place remove the wire that sends data. Finally, replace the crankshaft positioning sensor.
The 1999 Ford Ranger 3.0 liter engine throttle positioning sensor is located on the cylinder head. The sensor will be near the middle of the cylinder head.
Get your accelerator pedal checked, I had surging problems for 6 months and Ford could not find the problem, they finally replaced the accelerator pedal and the problem went away. The throttle positioning sensor seems to wear out in the spot that it is used most around 1800 RPM
Where is the temperature sensor located on a 2004 duramax diesel?
where is the crank positioning sensor on a 1996 newyorker van
above the starter
Round the neck
where is the camshaft exhaust positioning sensor on the in-line 5 cylinder motor, 2006 hummer h3
A 2000 Dodge Ram diesel does not have an oxygen sensor.
Most Camshaft Positioning Sensors are "Plug and play", if not I do not recommend playing with it if you are unsure have a mechanic do it.
The MAP sensor on a Trailblazer is the Manifold Air Positioning sensor. It is located on the top of the engine.
Idle air control valve sensor is located around the carburetor .
Depends on year. 1989 to 1998.5 it is on the front above the crank pulley. 1998.5 to 2002 it is behind the starter. 2003-present it is below the crank pulley.