I drove to my local Home Depot pulled my key out and was unable to put the key back in I played with it for a few hours I sprayed WD40 into the key lock cylinder and used a paper clip in and out and finally the key went in and I had the lock replace shortly after that.
You can replace the ignition lock cylinder in your 1994 Pontiac Firebird without removing the steering will. Remove the retaining ring at the top of the ignition cylinder. The ignition cylinder will slide out.
The ignition lock switch is found under the steering column on a 2004 Honda Civic. Remove the steering column and ignition switch. Loosen the mounting screws that hold the cylinder in place. Pull and replace the lock cylinder.
Usually you have replace the ignition key cylinder.
I have not seen a way to do it without removing the steering wheel (and airbag).
you will need to pull the steering wheel and column cover then it will be simpl to pull out cylinder and replace it.
You have to remove the steering wheel, and it requires special tools.
Maybe your steering wheel it's keeping the ignition cylinder to turn, so move the steering wheel and at the same time try to turn the key. Maybe you need to replace the ignition cylinder key lock
unfortunately yes you do. j to the izzo
How I can replace ignition switch cylinder from Isuzu Rodeo?.
You will need a steering wheel puller and a steering lock removal tool You rent them at yourlocal auto parts store
Not enough info to answer. Please re ask question and include the year, make, and model.
The switch is on the steering column about 18 inches from the floor. Simply take 2 screws holding it on and replace it.The locck cylinder is under the steering wheel.