bandwidth
bandwidth
If force is increased and pressure remained the same, then the area must have been decreased.
Pressure can be increased by adding more force or reducing the area over which the force is applied. It can be decreased by reducing the force or increasing the area over which the force is distributed. Additionally, changing the volume of a container can also affect pressure, as pressure is inversely proportional to volume for a fixed amount of gas.
As the coefficient of friction is not function of the area or not related to the area of the contact surface so the coefficient of friction remains constant on the increase of the contact area. The coefficient of friction depends upon the material of the friction surfaces only.
Increased surface area typically leads to more drag, which can slow down an object's velocity. This is because there is more area for air resistance to act upon. Therefore, increasing the surface area usually results in decreased velocity.
Yes, if it remains a cube.
81 is 81% of 100. Anything that decreased from 100 to 81 decreased by 19 percent of its original value.
The area of the enlargement is increased by (sf)2.The area of the enlargement is increased by (sf)2.The area of the enlargement is increased by (sf)2.The area of the enlargement is increased by (sf)2.
If the force is 10.0 n and the area is 1.0m2 .you divide the force and the area So the answer is 10mn2 i did the work down 10.0/1.0=10mn2 Thank You. :D this answer might bve wreeeeong
The area is increased to 22 = 4 times what is was.The area is increased to 22 = 4 times what is was.The area is increased to 22 = 4 times what is was.The area is increased to 22 = 4 times what is was.
The area is increased by 300%.
Some dangers of lighting a fire at night include decreased visibility, increased risk of accidental fires spreading, and difficulty assessing potential hazards in the surrounding area. Additionally, nighttime fires can attract unwanted wildlife or insects to the area.