Use the 9 volt setting.
yes you can.
They take a double adaptor, must be 240 volt
No, you need to supply the correct 18V to your speakers.
at Argos, Masterplug 1200mA Multi-Volt Adaptor you will need to set to 9 volts
Can you wire a 12 volt DC adaptor into a machine that uses 4 D batteries without ruining it?
There are many electronics today that run on 12 volt DC power. The good news for anyone who is traveling is that you can use a 12 volt AC adapter 12 VAC 2A.
No, that adaptor can not supply a 6 amp load because it's limited to 1 amp, most probably by the size of the prongs and/or the internal wiring.
Yes, but you are limited to the amount of current draw the 120 volt load can apply to the adapter.
Yes, a 9 volt 1600 mA AC adapter can be substituted for a 9 volt 300 mA adapter. The mA number represents the highest allowable current to be drawn from the adaptor. The adaptor that you want to replace has only 300 mA maximum capacity. The new adaptor has five time the capacity of the old one which means that devices that draw up to 1600 mA can be connected to it. Depends on what you are pluging into.. if could possible run unit hot..
Those are the 12 volt power supplies and take a cigarette lighter adaptor
No. 220V adaptor can't control the output voltage, 110V appliance will be fry. Use instrument transformer or voltage regulator instead.
That is probably too much for the circuitry, so it might work but only for a short time.