You have to make sure your part is completely clean, no grease or oil can be on the part, try cleaning with de-natured alcohol. (make sure your hands are clean an dry).
yes ............... paint bubbling is a chemical reaction. when anything bubbles you know there is a chemical reaction.
No, the solvents in lacquer are to hot and volatile. The lacquer will cause bubbling of the acrylic paint.
if it is hot out or if you coat it to heavy or to cold the paint will bubble but it is called paint blisters and it can happen with bad paint too if paint freezes or gets too hot
i am having the same problem have you got an answe
Yes, it can almost certainly be repainted, but whatever is causing the bubbling must be completely sanded off. It is unlikely that the bubbling (or blistering) is happening within the fibreglass , or in the gelcoat over it, but rather in the paint.
If rust is underneath your paint work, you will notice some bubbling. Rust should be sanded down, before painted over.
No, the solvents in lacquer are to hot and volatile. The lacquer will cause bubbling of the acrylic paint.
You can buy model airplane paint online at http://www.scalehobbyist.com/. You can also buy model airplanes and other accessories there.
Most hobby stores carry model paint in a wide variety of colors including black. They also carry paint from several different manufacturers. Hobby stores also charge reasonable prices for the paint.
Yes, as long as you have the same base that's not a problem.
In a scale model drawing of a car, the linear scale is 1:20. If it would take 1/4 liter of paint to cover the outside of the model of the car, how much paint would it take to cover the real
I'm having the same problem with a non-oil heater. I'm thinking the paint can't handle the heat.