answersLogoWhite

0

Should be a threaded part, so you might be able to remove it with vice grips or ez out. Might have to remove manifold from engine to machine it out.

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

On your 2002 Chevy 1500 Silverado the heater hose broke off from the core with the nipple from the heater core still inside Can that nipple be replaced or must you change the entire heater core?

If you take the heater core out of your truck and take it down to a Radiator Shop they should be able braise the old nipple back into place. Have them check it over when they are done. If your old heater core is in bad shape you're better off to know about it now, rather than after you go to the trouble of reinstalling it, only to have it go in another 250 miles. After all there is a reason why it broke in the first place... the metal may be getting fatigued due to age. Mew ones aren't that too terribly expensive. Good Luck, Jim.


You have a 1990 Chevy Pickup with a 305 engine and the fitting on the intake for the antifreeze that flows to the heater core broke off Where can you find a diagram for this part?

I assume you mean the fitting that is on the intake manifold that connects to the heater hose. Unfortunately, you will probably have to get a new manifold or possibly get a used one from a wrecking yard. * ++ Better answer ++ The part you are looking for is called a heater hose fitting. You have to screw out the old fitting first and measure what size your's is, probably a 3/4". Here's a "how to". A new intake will not include this. You'll need a new intake if you have damaged your threads severly. http://autorepair.about.com/od/doityourself/ht/heater_hoses.htm farmerTom Cut the hose off just above the metal part at the intake. Screw out the old fitting Go to home depot and buy a 3/4' king nipple. Teflon tape the threads and screw it into intake manifold. Slide the hose over the king nipple and put a hose clamp on it.


Where can you get a vacuum diagram for the rear heater control valve for 97 astro van?

vacume line to the valve has broke off from manifold vac that goes to the switch


The heater in your aquarium broke what shall you do?

Not sure what you are asking here, broke as in not working? or broke as in pieces of glass are in the tank? If the heater is not working, you need to purchase a new heater. If the glass tube is cracked or broken and pieces of glass are in your tank, then you need to unplug the heater and remove the glass from the tank.


1991 Chevy beretta heater hose fitting broke off at the intake?

you may have to remove the intake from the block and then use an extractor tool to remove the rest. then replace the connector.


Why no heater or fan working?

Bc its broke


I broke off the fitting on the firewall heater core from the water pump what do i do?

What you have to do, is replace the heater core itself


Why heater motor quit 1996 voyager?

because it broke.


Why doesnt the heater work in 1999 Nissan sentra?

because it's broke


1998 Chevy Malibu speedometer doesnt work why?

its broke


Why does your heater on your 1996 dodge Dakota spirit blow cold air?

Cause its broke!


How do you hotwire a 2006 Chevy Equinox?

My key broke of om the inginion