answersLogoWhite

0

HDPE Cable Support Blocks are used in electrical cable tray for the spacing of high voltage single conductor cables. They can be purchased from D&D Enterprises by emailing ddenterprises2@hotmail.com.

User Avatar

Wiki User

13y ago

What else can I help you with?

Continue Learning about Natural Sciences

What kind of cable should be used to establish a trunked line between two catalyst 2950 switches?

To establish a trunked line between two Catalyst 2950 switches, you should use an Ethernet cable with support for VLAN trunking. Typically, this would be a standard Ethernet cable with support for IEEE 802.1Q encapsulation to allow for the transmission of multiple VLANs over the same link.


How do you find the tension in an accelerating rope?

To calculate tension in a cable, take the mass of the section of cable and consider the force applied straight downward due to the acceleration of gravity. Divide that by two because the cable is supported at both ends. That is the force applied to one support in a downward direction. Now, consider the angle of the cable relative to vertical at the support. Using simple vector analysis, determine the force in the direction of the cable. That is the tension of the cable.If you also calculate the horizontal force vector at the support, that would be the force pulling the two supports together, although that is not usually an issue because there is often another section of cable on the opposite side of the support which balances the horizontal force vector.


Why inductance of a coaxial cable is expected to increase when the radius of the outer conductor is increased?

Because there is more room in the cable for the magnetic field to form. The magnetic flux density is set by the current in the cable, and with a bigger space that flux density produces more actual flux. The inductance is the flux divided by the current, so a wider cable has more inductance. But if the inner conductor is also increased in size by the same ratio, the effect is negated and the inductance is the same as before.


What cable for 150 amp Service Entrance Cable?

For a 150 amp service entrance cable, you would typically use 2/0 AWG (American Wire Gauge) copper or 4/0 AWG aluminum cable. This size provides the necessary capacity to handle the electrical load of a 150 amp service. It's recommended to consult with a licensed electrician for specific guidance based on your local electrical code requirements.


A four letter for a thick strong rope often made of metal?

cable

Related Questions

How many drives can a single SATA cable support?

Each cable is designed to support exactly one drive.


Which TVs natively support digital cable?

All digital TV's will natively support digital cable, but most CRT TV's will not.


Maximum cable length support of stp cable?

100


How are punch-down blocks is used to terminate a data networking cable?

66 block


How you check the stability of the cable feeder?

To make sure that a feeder cable is secure it must be supported. The support distance is stated in the electrical code book. The code also gives support of cable trays, conduit and all the different ways to support cables.


If you have cable Internet do you automatically get some basic cable TV channels?

Not if they put a filter on your line which blocks any t.v signal but usually the cable guy forgets to do it so try it anyways and if it works that's called FREE CABLE.


What channel is Nick at night on Shaw Cable?

Shaw cable does not support this show due to profanity


How does one determine how strong their cable is through cable attachments?

You can determine how strong your cable is through cable attachments by finding a weight load guideline online. It shows if the cable attachment is strong enough to support the cable.


This is not an HDMI cable. Its for Playstation only. HDMI to DVI would be a cable, but does not support audio. We do not have a way to tap the audio off of an HDMI port.?

This is not an HDMI cable. Its for Playstation only. HDMI to DVI would be a cable, but does not support audio. We do not have a way to tap the audio off of an HDMI port.


What is a cable tray?

A cable tray is a rigid structure to support electric cables.


What kind of bridge uses cable for support?

a suspension bridge


What is a hybrid hub?

A hybrid hub supports multiple cable types and can be used to support client with different cable types.