To bypass the switch you will need a wiring diagram or have to use a vom meter to find the wiring layout. The local dealer can provide you with a diagram.
Neither, probably be the switch.
If the power has been disconnected: To normalize the window 1. push down on the power window switch and lower the window 1/2 way. 2. pull up on the switch until the window closes and hold switch for a second. Per the owners manual pg 24. (2003 4 Runner)
remove door panel check to see if you are getting power and ground to motor. If so, bad motor--if no power to motor, check to see if you have power to switch if so ,bad switch--if not bad power feed to switch close but if the switch not on, you never get power to the motor.
It's pretty easy to remove the window switch on that year Lincoln. Take a small screw driver and pry up on the window switch carefully and it will pop out of the door panel. Here's also a link to a video that will show you how to do this.
You can get the ignition switch dash cover for the 2003 Monte Carlo at places like Auto Zone. You can also find this item online at AutoSport Catalog or on Ebay.
Try removing the main window switch on the driver's side. All the switches are connected to that switch. If that switch has gone bad then you need to replace it. Also check the fuse to the power windows. Might have gone bad.
My brothers 2003 Monte Carlo had this problem, was a plugged catalytic converter.
Try swapping it with the driver's side switch
how to replace power window motor for 2003 dodge grand caravan? how to remove side panel dodge caravan 2003?
Start by checking the power supply from the battery, then check to see if its not the up/down switch and check to see if the motor is bad.
i had same problem with my 2003 Taurus on my driver's door. I got a new power window switch for $40. you should check your fuses first.
define the problem is door switch and not window motor.