0
How Air cooling of 4 stroke single cylinder motorbike petrol engine occurs?
Wiki User
∙ 14y ago
The air cooling of a 4 stroke petrol engine takes when the air flows on the engine .it takes not by radiation.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
What occurs in a steam engine?
Water is heated to produce steam. The steam is used to power the engine. The power from the engine does the work or powers other instruments that do the work.
What is highest temperature allowable in a standard engine before damage occurs?
242
Which stage occurs just before the ignition in an internal combustion engine?
Compression
What is differences between cooling tower and heat exchanger?
Cooling towers are also known as an air conditioner's radiator unit. A mist cooling system are fans that have water dripping in front of them in boxed units. These are still used in some parts of the developing world in the absence of air conditioners.
Why cooling oil is used in transformers?
The oil in a transformer has two functions: Oil is a better electrical insulator than air is, so high voltage parts can be placed closer together, saving space and materials. Also, oil is more efficient at cooling the transformer. The oil circulates inside the transformer, removing heat from the internal core and transferring it to the cooling radiators or the surface. In small transformers, this occurs naturally, by convective currents. In large transformers, there are thermostatically controlled pumps to assist this cooling cycle.
What is car engine knocking?
When the fuel in an engine cylinder ignites prematurely or unevenly to cause power fluctuations and a "knocking" sound. usually occurs when an engine is very how or improperly timed.
What is adiabatic cooling?
Adiabatic cooling is cooling that occurs without removing any energy from the system. It often occurs when a gas is decompressed. Adiabatic heating and cooling play an important role in weather.
What does a locked engine on a car mean?
if by locked u mean seized, then it means the engine cannot be used. this occurs when the pistons become "stuck" to the cylinder walls
Operating principle of gasoline direct injection engine?
injection of fuel at high pressure is done directly into the cylinder where combustion occurs.
What causes Engine knock jeep?
Engine knock happens when an unbalanced air and fuel combination occurs inside of an engine cylinder. If the problem is not corrected the vehicle runs the risk of having a piston malfunction.
What does miss fire mean for a check engine light?
A mis fire occurs when the fuel/vapor mixture does not ignite and burn properly in a cylinder.
What is motoring curve in si engine combustion stages?
Motoring curve is Cylinder pressure Vs crank angle curve, which is observed when no firing occurs into the cylinder that means the pressure which build inside the cylinder is basically due to the compression of the fresh air charge going into the cylinder.
What occurs due to repeated heating and cooling of air?
Cfghjhghhgjh
How convection, conduction and radiation occur in an engine?
In an engine, convection, conduction, and radiation can all play important roles in heat transfer. Convection: Convection is the transfer of heat through the movement of fluids (liquids or gases). In an engine, convection occurs primarily in the cooling system. Coolant fluid circulates through passages in the engine block and cylinder head, absorbing heat from the engine components. As the heated coolant flows away from the engine, it carries the heat with it, and then it is cooled down in the radiator before returning to the engine. This cycle helps to regulate the engine's temperature and prevent overheating. Conduction: Conduction is the transfer of heat through direct contact between materials. In an engine, conduction occurs in various components where there is direct physical contact between hot and cold surfaces. For example, heat is conducted from the combustion chamber to the cylinder walls and then to the engine block. Similarly, heat is conducted from the cylinder head to the engine block and to the cooling system components. Good thermal conductivity of materials used in engine construction helps to efficiently transfer heat away from critical components. Radiation: Radiation is the transfer of heat through electromagnetic waves. In an engine, radiation occurs as heat is emitted from hot surfaces in the form of infrared radiation. This radiation can be absorbed by cooler surfaces within the engine compartment or can escape into the surroundings. However, radiation is generally a less significant mode of heat transfer in engines compared to convection and conduction. Overall, a combination of these three mechanisms helps to manage the heat generated by combustion and friction within the engine, ensuring that it operates within safe temperature limits and remains efficient.
How does surface area affect the rate of cooling of soup?
Increased surface area increases cooling. Cooling occurs by convection of air above the soup and water vapour loss.
Which changes occurs when LPG comes out of the cylinder?
physical change
What does global cooling do to the earth?
It cools it somewhat. Global cooling occurs after a volcanic eruption when clouds of dust remain in the sky for several days reflecting the sun's rays. This results in a cooling of the atmosphere.
