answersLogoWhite

0


Best Answer

To bleed the coolant system on a 1998 VW Beetle, remove the top from the overflow tank. Run the car for 10 to 15 minutes to force any air out of the system, then check the coolant level. Add coolant as needed.

User Avatar

Wiki User

9y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How Do you Bleed The Coolant System On A 1998 Beetle?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How Do you Bleed The Coolant System On A 1998 2.0 Beetle?

Start by taking the top off of the coolant overflow reservoir. To bleed the system, run the 1998 VW 2.0 Beetle about 10 minutes, then check the coolant level. Add coolant if needed, then replace the reservoir top.


Where is the bleeder valve for the coolant system on a 1998 toyota camry 2.2L engine?

There is only valve to bleed coolant and not air. If you want to bleed air of the system, you need to park the car on incline of 10-15 degrees (front ahead) and run the engine for some time. It will work out all air.


What kind of coolant for 1998 beetle?

G12 mixed half and half with distilled water.


1998 Chevy Monte Carlo as of lately the low coolant light will come on and there is antifreeze in radiator and the resevoire has up to the line what can the problem be?

did u bleed the coolant system of air cuz that could be the reason


Why does Engine heat up but no heat in vehicle 1998 jimmy?

low engine coolant level, your heater core is at the very top, so if its not full to the very top it wont work. add coolant and bleed system.


How do you change the brake fluid in a 1998 Yamaha Vmax?

You have to drain the system via the bleed screws on the calipers. Then, after refilling the system with fresh fluid, you need to bleed the system to remove any air.


Where is the starter relay locatedfor your 1998 vw beetle?

where is the starter relay on a 1998 vw beetle


How do you bleed the coolant system on a 2002 Lincoln Continental?

Just drained my coolant on a 1998 and had a hard time getting air out. I ended up filling degass tank almost to top idling engine for a short time . Then let engine cool and add more coolant had to repeat this procedure several times before heater would continue to blow warm air. Jeff


Why is your 1998 Chevy Malibu LS leaking coolant from the left and right front of the engine?

have coolant system pressure tested and look for the leaks


What is the torque on 1998 VW Beetle rear axle nut?

what is the torque 1998 beetle front spindle


Air conditioner on 1998 Chevy Malibu blows hot air?

the system is probably out of coolant.


How do you remove an air pocket from a cooling system on a 1998 cord crown Victoria?

You can bleed the cooling system from the heater lines at the firewall. Before you start the engine, loosen one of the heater lines, then replace it without the clamp. Start the engine and when it reach's operating temp. slowly open that heater hose slightly. Coolant and air will then come out. Be careful of the fumes because the coolant will drop on the exhaust. Make sure the heater inside the car is on max. Bleed the system till all the air is out and you get hot air inside. Refill the rad.