5 - 8 seconds if you didn't put it on too heavy!
Depends on how tight the joint is also. Poor fitting joints contain air gaps, which take longer. If you need an instantaneous bond, get the accelerator, which is spritzed on.
The word "glue " alone is inadequate. There are many kinds of glue and each may take different times to dry.
It takes about 12 hours to completely dry.
Crazy Glue's general directions for use is to make sure that both surfaces to be bonded are clean and free of dirt, grease, oil, or anything that would keep the parts from making a good dry physical contact. If you are looking for directions to use Crazy Glue on something specific, you would need post exactly what you are trying to glue / bond.
Glue in the BottleBecause air can't get in to dry it; if you leave the top off for long enough it will start to dry inside.
Super glue won't dry vinyl tube. You have to dry it with heat or a cloth before gluing it. -Why are you using super glue anyway ? -There are many proper vinyl adhesives that work far better .
A PVC pipe glue will take at least 4 hours to dry. 12 hours before putting water pressure in it.
Your skin will dry up.
Fans or air flowing definitely help glue to dry.
It depends what you are bonding with it. Small amounts of Elmer's white glue can dry in an hour. Binding wood takes longer and you should clamp it and wait at least 3 hours.
Super Glue's 'Original' will dry clear in that use.
If water has been mixed with your glue, then it's a type of PVA glue. Mixing water with it is not a good idea, as it takes longer to set and is not a strong joint. It may take up to 2-3 hours to dry to the touch, and at least 12 hours to fully cure, due to water's time to evaporate totally.If you want good results from glue it's usually best to use them as they come.
As long as it can cure in dry conditions,