This is an expansion of my question:
Basically - Analog signal goes in an analog EQ, from the EQ I solder the wires on the spot after they have been sliced into frequencies and before they have been mixed into one EQ output channel. So on a basic I will have about 12 mono channels on each of the frequensies. Each channel will go to a circuit board with a small processor and a Java code that will analyze the volume of the analog input sound and put an output on the transistors that will manipulate the LEDs (on how high they will go.)
I'll have a shop that I will buy from but you can name the component in general in general: Please be as specific on the types and models as possible.
Here is a basic idea with some notes.
http://www.divshare.com/i/9339708-3c3
The main circuit board of the computer is the motherboard.
rigid-flex circuit board
is the main printed circuit board (PCB)
Circuit board kits vary in cost depending on what type of circuit board you are building. You can buy circuit board kits from Amazon starting at $35.00. There are many other options out there as well.
printed circuit board printed circuit board
mother is the main circuit board of the computer on which all the hardware devices are connected to the supply while circuit board is the circuit which a particular device use and is connected to motherboard
A circuit board It is a board containing devices passive and/or active that can be installed on a system to make it whole. Usualy refered a PCB OR PRINTED CIRCUIT BOARD.its a board of circuits
A daughterboard is a circuit board meant to be an extension of another circuit board. It is also called a mezzanine board.
printed circuit board
The main circuit board is known as the Mother Board.
Circuit board kits vary in cost depending on what type of circuit board you are building. You can buy circuit board kits from Amazon starting at $35.00. There are many other options out there as well.
A PCB (Printed Circuit Board) is the board on which components are placed and soldered into position. It doesn't do anything in a circuit, merely the foundation on which a circuit can be created.