0
2" or 3" integral trap built into toilet bowl.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
How do you plunge a toilet?
Shove the plunger into the toilet and go to town. The key is to get a seal between the plunger and the toilet bowl around the exit area. This is what will hopefully allow you to 'move' the water and shift whatever is blocking the pipes. It helps to have enough "water" in the toilet to cover the plunger base. This may involve taking the scary risk of flushing the toilet, but without enough liquid in the toilet, you're apt to make a big splash.
How big is water resistance on a water slide?
Water resistance is huge!!
How do you plunge a?
Shove the plunger into the toilet and go to town. The key is to get a seal between the plunger and the toilet bowl around the exit area. This is what will hopefully allow you to 'move' the water and shift whatever is blocking the pipes. It helps to have enough "water" in the toilet to cover the plunger base. This may involve taking the scary risk of flushing the toilet, but without enough liquid in the toilet, you're apt to make a big splash.
Why does your feces clog every toilet?
In order to hold water in the toilet bowl (and prevent unpleasant smells from coming into the bathroom) there is an elbow in the toilet. After you see the water go down the toilet, it then travels upwards through the elbow and then back down again into the drain line. The toilet clogs when things are too big to travel freely through the elbow.
How do you take out a toilet and its hole for adding vinyl tile to the room since this is a bidet that we want to go away hole in slab and all?
The toilet can be removed fairly easily. 1. shut off water supply to toilet 2. flush toilet to get most of the water out of the tank and bowl 3. with a cup or a wet-vac remove the remaining water from the bowl 4. remove the water supply line from the toilet (usually on the left side under the tank) 5. remove the 2 nuts from the bolts sticking out of the bottom of the toilet 6. lift the toilet off of the bolts and you're done The "hole" doesn't need to be removed. Simply cut your vinyl around the flange. be careful not to cut the hole too big so that it is concealed under the toilet when you place it back on the bolts. You will also need to scrape the wax ring off of the bottom of the toilet and off of the flange on the floor. You will need to install a new ring when you reinstall your toilet Hope this helps
What is causing the toilet bowl to slowly empty after it fills and after the water tank fills?
the toilet bowl will fill the bowl to a specific level to allow the trap to work properly and once the tank is done filling then you should have no water running into the bowl. To test and see if your tank is leaking into your bowl just put a few drops of food coloring in your filled tank and if you see the color in your bowl then you most likely have a leaky flapper or flush valve or can be your height of your tank water is to high and its running through the overflow or the fill valve is syphoning.
Why would dark water fill the toilet when it is flushed?
My toilet is doing the same thing this morning. We had a big rain last night. Could this be part of the cause?
How do you remove a small bowl from a big bowl?
Keep the Bowls on gas stove for some time.The bowls will loosen. Also putting them in hot water with hot water touching outer bowl works
Does the big rocking horse have a toilet in it?
No, but there is a public toilet outside. The big rocking horse is only for looking around and does not need a toilet!
What is the big water slide in Queensland called?
The theme park with the huge water slide in WQueensland's is called Wet 'n' Wild. It is in southeast Queensland, at Coomera, between Brisbane and the Gold Coast.
What do box-turtles drink?
water. put it in a shallow dish that's big enough for them to get in. change it everyday cause it doubles as a toilet
What is different from old toilets to new toilets?
The biggest difference from an old toilet to a new one is the water consumption. An older toilet can use up to 16L of water per flush! A modern toilet only uses between 3-5L per flush. A big money saver!
