Want this question answered?
about 12,000
check out www.energyefficientnation.org. has the answer to tons of questions like this.
Rule of thumb is 1.5 tons per 1000 square feet of home.
Divide the heat loss or gain obtained by the load calculation by square footage of the building.
You need 100W per square meter. 100W equals around 341.3BTU. 1 square meter are around 10.7 square feet. You therefore need around 32 BTU per square foot.
Florida or Maine?
what as the cost of heat for a 1200 square foot home in 2004
about 12,000
check out www.energyefficientnation.org. has the answer to tons of questions like this.
Will a 40,000 btu furnace be enough to heat my 1375 square foot middle unit town house.
The average resident of Rhode Island spends approximately $1400 per year to heat their home. How much you will pay to heat a 435 square foot house will depend on how warm you like your home as well as how well insulated the house is.
Rule of thumb is 1.5 tons per 1000 square feet of home.
A commonly used formula is 600-650 square feet per ton. So it would be recommended to use a 2-ton heat pump for a 1300 square foot home. However, other variables are often considered, too, such as the age of the house.
its usually about 20 btu's per square foot
Sorry, but there are too many variables in your question to give a simple answer. It will vary based on what material you use to build the house, where you build it, one story, 2 story, split level, basement, what sort of heat and A/C, how many bathrooms, what sort of floors, etc. By the way, that is a VERY large house.
30000 btus for every 400 square ft
30000 btus for every 400 square ft