No you can only have one dryer on a 240v circuit and nothing else can be attached to it either considering your using a 240v electric dryer
The dryer is a 240v dryer so two of the wires are your hot wires, or the ones with power on them. One is your ground wire. And the forth is your neutral.
The UK uses 240V, so your dryer will probably work, as the US uses 240v in homes for dryers. However, your washer won't as the US uses 120V for washers.
You will have to install a double pole breaker in the fuse panel and then run new wire (10/3) to the location of the dryer and install the proper plug. You will need a 4 prong plug; the older 3 wire plugs no longer meet code for new work.
In North America, the standard is 240V, 60Hz.
I suspect you mean GFIC breaker. The dryer will not cause the breaker to fail.
Don't understand this question. If the breaker is on, then the dryer would function normally, if the breaker your are referring to is the one for the dryer. If the breaker is off then no function. A dryer runs on 220.
Chances are there is more than 1 outlet connected to the 110volt circuit you are looking to convert. So therefore the easy answer is No. The 240volt dryer circuit must be a dedicated single circuit for the dryer only.
240V appliances, such as range, dryer, air conditioner.
Minimally 30 AMPS
You can use an in-line coupler to extend a telephone line.
it does not have to have a separate line from the utility...but it typically has a line running from the already existing line within the home... like remove an elbow from the furnace line and install a tee, then a shutoff valve, then the line to the dryer. After the line arrives in the viscinity of the dryer, it should have another shutoff valve prior to connection to the dryer. Local codes may require additional fittings ot shutoffs... we love our gas dryer... wouldn't have an electric model...