To calculate the amperage of an appliance use the following equation, I = W/E. Amps = Watts/Volts. In North America the home voltage for larger appliances is 240 volts. Somewhere in the oven there will be a name plate. on it will give you the wattage of the device. Divide the voltage of 240 volts into this wattage value and you will end up with the amperage that the oven requires to operate.
Wire size is based of the amperage of the device. To answer this question the amperage is needed or the wattage and voltage of the device.
The 225 amps is the secondary output amperage. Look on the machines nameplate to find the input amperage. It is that amperage that is needed to size the feed wire and there the breaker size. When you find that amperage you may want to re question the breaker size.
Without knowing the wattage that the hair dryer is rated at an amperage can not be stated. If you find the wattage, use this equation to find the amperage. I = W/E, Amps = Watts/Volts.
A breaker is based on the amperage that is drawn by the pump motor load. Find the full load amperage of the motor. The wire fed from the breaker has to be rated at 125% of the motors full load amperage. The breaker for motors have to be over sized, usually 250% of the motors full load amps.
There are several amperage ratings on AC compressors/motors. Locked Motor Amperage (LRA) is the amperage that the motor is fused for. The load of the motor is expressed in amperage or wattage, which is probably the case here. Low amperage readings on an AC unit being charged by amperage load would indicate low freon. High amperage readings indicate overcharge when charging by the amperage load. AC units are not accurately charged by amperage readings and the efficiency of motors is not expressed in amperage readings.
Average amps for a toaster oven
A breaker is sized by the wire size. The wire is sized by the amperage. The formula for amperage is I = W/E. Amps = Watts/Volts. As you can see with no voltage stated an answer can not be given.
Wire size is based on the amperage drawn. To find the amperage, the voltage must be stated. Use this formula to find the amperage. I = W/E. Amps = Watts/ Volts. Once you have the amperage, restate your question using the new found amperage or state the voltage that supplies the lights.
Wire size is based of the amperage of the device. To answer this question the amperage is needed or the wattage and voltage of the device.
The 225 amps is the secondary output amperage. Look on the machines nameplate to find the input amperage. It is that amperage that is needed to size the feed wire and there the breaker size. When you find that amperage you may want to re question the breaker size.
Wire is sized by the amperage that it will carry. 5 kW is 5000 watts. The equation to find watts is W = Amps x Volts. The equation to find amps is Amps = Watts/Volts. As you can see a voltage is needed to calculate the amperage. Once the amperage is stated, the wire size can be given for that particular amperage.
yes it can
No; drawing more than the rated amperage from a transformer will cause it to overheat.
Oven, oven mitt, orange
You can find a rack for a Decosonic oven at many websites, including eBay, or directly with the manufacturer.
There are zero watts in 220 volts. Watts are the product of amps x volts. To receive an answer, the amperage of the device has to be stated. This amperage multiplied by the stated voltage will give you the wattage of a device.
You can find many recipes for convection oven cooking in a booklet you probably received with your oven. There are also recipes on the internet. You can also find them in other cookbooks.