There may be something wrong with your water heater. Try turning up your water heater in your house. If that does not work, you should contact either a plumber or someone who works with furnaces and heaters.
By Andreina Urdaneta A clean water heater will heat and maintain water better and last longer. Once a year, flush your water heater, and in extreme hard water areas, at least twice a year. If you feel up to the challenge, here are some tips to help you in a basic cleaning. 1 Turn the water heater and the cold water supply to the water heater off. 2 Hook a high-quality garden hose to the drain valve, and place the other end in an area where hot water will not cause damage. 5. Open the drain valve. 6. Disconnect the cold water pipe on the top of the water heater. This step will let air into the water heater so it will drain. When the water heater is empty, close the drain. 8. Pour tile cleaner into the cold water, leave for a couple of hours and drain the detergent out of the tank. 10. Reconnect the cold water supply to the water heater. Open the cold water valve and let the water heater flush for a couple minutes. 12. Close the drain valve and open the hot water faucet nearest to the tank, and let the water heater fill. 13. When water starts to come out of that faucet, reopen the drain and let the water heater continue to rinse. After all the air is out of the water heater, turn it back on. Take care of your water heater, and it will take care of you. If you keep ignoring the task, your water heater may just leave you in the cold.
If water is only drawn from the cold faucet, then no, the water heater is not involved. However, if water is drawn from the hot faucet- even for a few seconds- hot water IS withdrawn from the heater, and fresh cold water drawn in to be heated- even if the hot water did not make it all the way through the pipe to the faucet- and the water heater will work to heat that fresh cold water.
Check piping. Make sure cold line going into cold side of water heater and hot side coming out hot side. Cold feed for water heater should come off main cold line. Make sure valves are open to and from water heater.
Low coolant? Bad thermostat? Heater core plugged,restricted or airbound? Heater control cable or valve not working?
COULD BE A BAD HEATER CORE COULD BE A BAD HEATER CORE sounds like the heater control switch needs replacing.if that doesnt fix it, you need new heater core
Yes
Cold water pipe.
Because hot water heater breaker has tripped, or hot water heater has failed.
yes
When you want to know when your hot water heater is broken, simply run your faucet and test the water. If it's cold, the heater is broken.
Personally I would not, as the cold water could thermo-shock the heater. And if you have a glass-lined tank, it will crack it and shorten the life of the tank. I would follow the manufacturer's instructions.
It converts cold water to hot water.