How can I re-program my 1994 Pontiac Transport mini van for a replacement key fob The lock control does not have a reset button?

Answer 1

First make sure your new remote has the following numbers on the back:

P/N: PRINCE 10215012

MODEL/FCC ID: ABO0603T

The 95-96 Models for which the remotes are way more plentiful have a different system even though the remotes look the same.

Remove the glove box (3) 7mm screws top inside glove box opening and another (3) 7mm screws underneath. Pull out the box. The keyless entry module is clipped to the rounded cross-car padded assembly just above the glovebox opening. There's a little plastic push point on the right side of the module, if you don't feel it right away pull the module out so you can see what you're doing.

1st you need to reset the system. With the ignition in "run" hold down the push point for 10 seconds. The system will cycle the locks which indicates "all cleared". Turn the ignition off and then back to run. Press the push point once and then the unlock button on each remote you want to work the car within 5 seconds of each other. You need to have all the remotes you want to work it on hand for the programming. System can accept up to 4 remotes.

Everything goes back together in reverse of disassembly.

You'll lose the automatic door lock feature programming (doors locking and unlocking with transmission selector) reprogramming that is covered in your owners manual.