0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What happens if you put a white piece of paper under a green light?
If you put a piece of white paper under a green light all that will happen is the paper will turn green. The only time this will vary is if you have special ink that will show up under certain colored light.
Why does a green object look black in red light?
For exactly the reason that you call it a "a green object". You describe it that way because most of the time, when it's being illuminated by light of all colors, the only color that it does NOT absorb, and that remains to bounce off of the object and be seen by your eye, is the green. When there is no green light striking the object, it can't reflect any light to your eye, and it appears black.
How does a traffic light signal work?
Traffic lights have the light sets, which emit colored light to "control" traffic. Additionally, there is support equipment that includes programmable logic controllers, or PLCs and sensors in the street. Let's take an intersection with two lanes of traffic in each direction on both roads. We'll include a left turn lane in all directions, too. Ready to look at how things work? Then let's do that by starting with the sensors. The sensors are basically coils of wire (inductors) below the pavement. A vehicle that passes over one will cause a change in the inductance of the coil. The controlling circuits will sense this and know a vehicle has passed over it. All the lanes will generally have these coils buried in the street near the intersection. Let's move on to the lights. The lights, the red, yellow and green ones, simply respond to programmed instructions. These include a combination of timing and sensor data. The timing is set by traffic engineers who use traffic data to "dial in" the controls. When enough time has passed, as set, the light will change to stop traffic along one street and allow traffic on the other street to proceed. If a vehicle passes over the sensor in the turn lane, that traffic is given a chance to cross at the beginning (or end) of flow in that direction on that street. If no traffic has crossed the sensor, that traffic lane will be ignored. In cases where a "minor street" meets a "major street" and the hour is late, the timing circuit might be "paused" to allow a constant green on the major street unless a vehicle is sensed on the minor street. Different combinations of traffic flow can be accommodated by considered programming of the controllers. One instance of this is to set up a "cascade" of green lights for traffic moving along a long street with a lot of lights. If a driver maintains a "regular" speed and traffic isn't exceptionally heavy, the driver will see the signals turning green as he approaches them. Other variations are possible, as any driver experienced in an urban setting can explain.
Is it rare for any motion to increase in velocity?
Not at all. It happens every time a car pulls away from a traffic light or a STOP sign. Also any time anything falls.
Difference between white and black color?
AnswerBlack and white are not really colors, in the sense of having a specific hue. Black is the absense of all light, while white is the presence of every color of light. A white lightbulb is really emitting tons of red, yellow, green, blue, and purple light all at the same time.
How long do green traffic light show?
There is no exact time simply because no 2 intersections are the same, there are factors that change this time such as: How much traffic goes through the intersection on one direction?
How long is a traffic light between red and green?
There is no exact time simply because no 2 intersections are the same, there are factors that change this time such as: How much traffic goes through the intersection on one direction?
Is stopping at a green light illegal?
If you are blocking traffic flow for a long time then yes.
How many seconds before proceeding at a green traffic light?
You don't have to wait any amount of time when the light turns green, when the light turns green that means the intersection is safe for you to proceed.
What do you do when you're approaching a green traffic light?
When the traffic light comes into view and it's green, it was likely green for a long time, unless you also observe cars just starting to get going. If you see the traffic light is green in the distance we call this green light "stale", meaning it could turn yellow any second. A traffic light that just turned green, we call this green light "fresh", meaning it just turned green and it won't be turning yellow for a little while. Of course these times between from when it turns green then back to yellow and red again varies on the intersection. To answer the question when you're approaching a green traffic light you should prepare to stop as that green light is "stale". You don't necessarily have to slow down just get ready to hit the brake.
What does a green arrow showing at the same time as red traffic light mean you can do?
The Red Light Is Telling Everyone To Stop. The Green Arrow Is Telling You It Is Ok To Turn At That Time (Which Ever Way The Light Is Pointing).
What does a green arrow showining at the same time as a red traffic light mean?
People are allowed to turn in the direction the arrow is pointing, but they can not go straight across the road, that should really be common since.
If city traffic lights are timed for 35mph traffic are they also timed for 70mph traffic?
No, they are not, because period time between green lights are scheduled to be on when you reach the next stop light, considering your speed of 35 mph. If you increase your speed, you will arrive earlier, so the light will be red instead of green as you need it to keep driving ahead.
Will a set of traffic lights flash at the same time after 4 minutes if the red light flashes every 3 second andthe orange every 6 seconds and the green every 4 seconds?
Yes.
How does a trafffic light work?
A traffic light is placed at an intersection of two or more roadways. Each approach of the intersection has at least one signal head with three bulbs (red, yellow, and green) facing it. Cars approaching the intersection can go through it if the light facing them is green and cannot go through it when the light is red. Signals go from green to yellow (to slow down for the red) to red and then back to green. Only one of the two roads at a signalized intersection can have a green light at one time and the traffic on the other road must wait for the light facing them to turn green.
What is a green light that has been green for a long time?
A light
How long is red light traffic?
There is no specific length of time for a red light. Traffic engineers make that determination according to the flow of traffic.
