How can i change the oil and oil filter on 2007 ford mustang 4.0l v6?

Answer 1

1. Raise and support car on jack-stands or ramps
2. Place drain pan under drain plug and unscrew the plug
3. After all oil has drained, wipe off the drain plug
4. Clean the drain plug opening, reinstall the plug and tighten it securely but don't strip the threads
5. Move drain pan under oil filter
6. Loosen the oil filter by turning it counterclockwise with oil filter wrench
7. Once the filter is loose, use your hands to unscrew it from the block. Just as the filter is detached from the block, immediately tilt the open end up to prevent oil inside spilling out.
8. Using a clean rag wipe off the mounting surface on the block. Wipe a layer of new oil onto the new oil filter gasket then install the new oil filter
9. Add new oil to the engine through the oil filler cap using a funnel to prevent oil from spilling onto the top of the engine.
10. Pour 4 quarts in, wait a few minutes to allow the oil to drain into the pan, then check the level and add more as needed