there three connections of armature circuit possible in wiper motors. by changing these arrangments, we can control the speed as well as the torque of any wiper motor.
The wiper control module is located inside the wiper motor assembly.
in the front side of the wiper motor
on the bottom of the wiper motor. its where the cables plug into
Broken linkage? Disconeccted linkage? EDIT::: The most likely cause is a bad wiper control module, its attached to the wiper motor
The windshield wiper control module is usually in the fuse box located in the engine compartment of most automobiles. Sometimes the windshield wiper control module is located on the firewall next to the windshield wiper motor.
That depends on what you're calling the "control module". There is a switch that controls where the wiper blades "park". It's inside the wiper motor assembly. In fact, most of the controls, except the switch on the steering column, are inside the wiper motor.
Its attached to the windshield wiper motor you will have to remove the cowl to get access to it.
It is on top of the wiper motor itself. it's intergral.
the process of contoling various charactristics of motor is called motor control eg. speed , frequency, torque , current etc.
The board is under the cap in the Wiper Motor.
Remove the wiper arm from the wiper motor. Remove the wiring harness from the wiper motor. Remove the wiper motor retaining bolts. Reverse the process to install the new wiper motor.
It is the wiper control module mounted on top of the wiper motor. Available at most auto parts stores for just under $30. The salespeople have limited knowledge of this part and will try to sell you everything from a wiper motor to the wiper switch on the steering wheel. The correct name and part number is Wiper Motor Pulse Board Module 81-158pb.