To replace the car window on the driver side you will need to follow the following steps. 1. Disconnect the car battery if the window has automatic controls. 2. Remove the window trim and disconnect the window from manual or automatic controls. 3. Unbolt the regulator that holds the glass and remove the glass. 4. Replace the glass and reattach the regulator, controls and trim.
In almost all makes of car you have to replace the window regulator. That's the entire mechanism that holds the window and raises and lowers it.
It can be seen from the outside of the car and is on the windshield of the driver's side where the dashboard and the window meet. If it's not there, it can be found on the inside of the driver's side door.
I was qouted $217.95 plus tax to replace a shattered driver window.
On a UK car it is behind the driver's side front body panel. I had to partly remove the front bumper and the panel to replace it.
Take it to a custom car shop.
for what car? 2000 gm s15
Your best bet here is to buy a Haynes or Chilton manual for your car. they both have pretty complete instructions on this job.
To replace a rear window regulator on 2005 CTS Cadillac remove the side protection panel of the car door then adjust the regulator.
I have the same problem, same year of car too, I do have a manual window crank, they told me to unscrew the 9-10 screws and the outside panel comes off.
Any window from a 1992-2002 Eldorado would work as they were all the same in those years
you just replace it like other cars, get an car enginner to fix it.
Oh yes!! I just got busted at the inspection station. VA. law states that the drivers side window is the only window that must work on it's own power to pass inspection.