"Main sockets" is referring to fuse sockets, particularly the main fuse sockets for a fuse panel.
Erosion does not cause fire
A circuit breaker protects the wires that the devices are connected to. If the devices that are connected to the circuit are 20 amps the wire size should be #12 wire fed from a 20 amp breaker. This breaker should not trip unless the circuit is overloaded or a fault occurs on the circuit. If the devices that are connected to the circuit are15 amps the wire size should be #14 wire fed from a15 amp breaker. This breaker should not trip unless the circuit is overloaded or a fault occurs on the circuit. Putting 20 amp sockets on this 15 amp circuit will work but the circuit is limited to the amount of load that can be plugged in. You will not get the full capacity of the 20 socket because the breaker will trip at 15 amps.
Would be to make sure that cables aren't damaged and that your not going to get an electric shock off of it, also to make sure that the correct fuse is being used in the plugs or that the plug sockets are not being overloaded with to many plugs.
Yes, the input of a lightning strike cause fire spread depending on what sort of material such as wood
It will cause a fire! x
Once it is overload, it can cause a fire.
because it can overload and then create to much heat and cause a fire
Because of the risk of fire
It can start a fire or flip a braker.
the outlet will become overloaded and can start a fire
It has been overloaded is the most likely cause
Except for the overloaded fire escapes, no part of the building collapsed during the Triangle Shirtwaist Factory fire.
have fire proof doors. unplug all sockets before leaving the house or sleeping.
4.99 to 6.99 Auto zone
Light fittings should not be overloaded electrically because overheating can cause a fire. Alternatively you could use a 20 watt low-energy bulb.
Having boiling oil dripped into them can cause them to hurt.