0
What else can I help you with?
Saving Money with Spa Chemicals?
Many spa chemical products are expensive, but offer no advantages over generics. Most spas need 3 types of chemicals: a disinfectant, pH up, and pH down. Pool chlorine tablets can be used in most spas. These can help save money over spa-branded products, while ensuring a clean and sanitary spa. pH is usually raised by the addition of chlorine, so no pH up product is usually needed. pH down spa products can be replaced by sodium bicarbonate, commonly known as baking soda. Algicide can be replaced by Borax, often saving hundreds of dollars a year. Make sure to consult a pool professional before using any chemicals.
Can you use 20 mule team borax to raise pH?
No, 20 Mule Team Borax is not recommended for raising pH in a pool or spa. It is primarily used as a laundry booster and cleaner. To raise pH in a pool or spa, you should use specific pool chemicals like soda ash or sodium carbonate.
What causes foam in a spa how do you control the PH and Bromine in a spa?
Get a Bromine test kit and a pH test Kit. The bromine level should be around 4.0ppm and the pH should be around 7.4.To raise Bromine, add Bromine.To lower Bromine, add waterTo raise pH: add soda AshTo lower pH: add Muriatic AcidAs for the foam, it is caused by tanning oils, sunblocks, shampoos, conditioners, soap, body oil, fabric cleaners etc. To correct this problem add hexametaphosphate or "Foam Out".
If the chlorine levels are correct but PH is constantly high what is the best solution?
I have the same problem with my 2000 gal. in-ground spa. Each week I have to add muriatic acid to reduce the PH. Since my spa is small, in relation to a pool, I usually only have to add about 1/4 - 1/2 cup of acid to bring the PH down to the perfect range.
If stomach acid has a PH of 1 and a person took a tums tablet which raised the PH to 3 how much was the increase in PH?
The increase in pH would be 2, as going from a pH of 1 to a pH of 3 represents a change of 2 pH units.
What is a normal pH water balance for pools?
Normal pH levels are between 7.2 and 7.6 Too far above or below and the chemisrty used in the pool will be less effective. Pool & Spa
How much lemon juice would be needed to lower the pH of a 4000 gallon spa?
The amount of lemon juice needed to lower the pH of a 4000-gallon spa would depend on the current pH level and the desired pH level. Generally, you would start with a small amount, such as a few cups, and then test the pH level using a test kit. Adjustments can then be made accordingly until the desired pH is achieved. Remember to follow manufacturer guidelines on chemical usage to avoid over-acidifying the water.
How do fertilizers affect the pH of waterways?
Fertilizers contain nitrogen and phosphorus which can affect the pH of water ways. A pH of 7 is neutral. When water pH is raised above this, it can have harmful affects on the waterway, causing nutrient or water pollution.
Will pH minus lower bromine level?
No, pH minus will not lower bromine levels in a pool or spa. pH minus is used to decrease the pH level of the water, while bromine is a type of sanitizer. To lower bromine levels, you can dilute the water or use a product specifically designed to remove bromine.
How many times a solution of pH equals 2 be diluted to get a solution of pH equals 5?
When diluted 10 times pH is raised by 1 unit in a acid.So you have to dilute 1000 times.
Is spa pH decreaser ok to use in a swimming pool?
Using spa pH decreaser in a swimming pool is not recommended, as the formulations can differ significantly. Spa pH decreasers are typically designed for smaller volumes of water and specific conditions found in spas, which may not be suitable for the larger volume and different chemistry of a swimming pool. It's best to use products specifically formulated for pools to ensure proper balance and avoid potential water chemistry issues. Always check the manufacturer's guidelines before using any chemicals.
How much vinegar per gallon in spa?
For a spa, it's generally recommended to use about 1 to 2 cups of vinegar per gallon of water for cleaning purposes. This concentration helps effectively remove mineral buildup and maintain pH balance. Always ensure to rinse thoroughly after using vinegar to prevent any potential damage to spa components.
