You can access your router using the default IP address it's usually 192.168.1.1 - It might be different depending on the router you have. Read the documentation and use the Installation Disk they provided with your product. It has step by step directions, you can also look for a sticker on the back of you router sometimes it has the IP right on there.
Hope this helps
Nowadays virtually any wireless router. When you get a router you usually have about 4 lan ports (switch) and wireless router in the same box.
You need a router. The cable modem connects to the modem's uplink port and the switch can connect to any available port on the router. This wll enable any computers connected to either the router or the switch to access the internet. Through a Wireless Access Point/Gateway/Router. U can connect ur switch w/it's 5 wired pcs to the Router and ur wireless pcs to the router.
ISR.
A Wireless router is a device that performs the functions of a router but also includes the functions of a wireless access point and a network switch.
SSH
In order for you to have internet, the router should be connected to a cable modem or another switch or wireless router which already have internet access.
Network+ Guide to Networks answer: Bridge, Switch, Router
Switch and access point
-Switch -Router -Wireless Access Point
There are at least two ways. First, you connect the wireless router directly to the cable modem, and then the switch in the wireless router. You have to connect the cable coming from the modem in the wireless router internet port. Second, you connect the wireless router to the switch, again the cable coming from the switch you have to connect on the wireless router internet port. It's better to put the wireless router just after the modem, but it's not required.
What is diffrent between router and switch?
A switch cannot function as a router. But you can plug a switch in to one of the ports on the router if you need additional ports.