hey had this same prob u cant bypass it but you can buy a bypass pulley but gotta remove the compressor i tried to bypass with a belt but its not enough tension so get the pulley and your good to go
remove compressor put a bypass pulley in its place replace belt
Google Pontiac boneville ac compressor bypass pulley. There are a few places that sell a replacement pulley that goes in the spot of the compressor that allows use of the original serpentine belt.
You remove the ac compressor and install a pulley bypass kit from a part store.You remove the ac compressor and install a pulley bypass kit from a part store.
yes you can, just go buy an ac bypass pulley, pull your compressor, and put pulley in its place
I am unsure what you mean by bypass. The Air Conditioning system will not work with out the compressor. The compressor can be disabled by unplugging the electric clutch. Most of these little Fords could have a different length belt fitted so the compressor pulley didn't turn at all.
Yes, but if you unplug the wiring to the compressor, the pulley will simply idle without causing the compressor to do anything, unless the pulley clutch is faulty and is constantly engaging the compressor, in which case, you will have to bypass the compressor pulley or replace it. If you must bypass the air conditioner, you will need a shorter belt (by at least 12 inches). It is possible that the stock belt for your motor without air conditioning option will fit, try that option first. Otherwise the proper fit will have to be determined by trial and error or use string to trace the new route and measure its length. The new route should be exactly the same except bypassing the compressor.
You will need to buy and install an ac bypass pulley from Napa or other parts store to bypass the ac compressor.You will need to buy and install an ac bypass pulley from Napa or other parts store to bypass the ac compressor.
You mean the air conditioning compressor? It can be done, but you'll need to find a belt which will work for that application... it's a bit of a crap shoot, and I suggest you find some F150 forums to find out which belt you can do this with and how to route it, although there really is no need to bypass it.. as long as you have the AC turned off, the compressor clutch won't engage, and the pulley will spin freely.
Yes but you need to get the WITH OUT AC pulley and bracket. Should be able to get at your local auto recycler.
Bypass, in what way? Your pulley is broken, and the belt is off. The A/C will no longer work and the compressor will not turn.
You need a bypass pulley which replaces the a/c compressor. just had it done on my 96 monte. about $40US online.
Most likely a bad bearing on compressor pulley.