If your HDs are the IDE type, then you need to either set one to master and one to slave, or use 'cable select' to do it automatically. When you bought your new HD, chances are that it is already in cable select mode, but you should check to make sure they both are before you continue. You can do this by looking to the right of the large series of pins where the data cable is connected. You should see some more pins, with a 'jumper' connectin two of them together. The position of the jumper sets the HD to whatever mode you want. Check on the back of the HD or in the manual to find out which position is cable select.
When both drives are in cable select mode, put them both into the case mounting, preferably not too far apart, and screw them in. Then find the cable which was attached to the first drive. You'll see that it has 3 connectors: 1 in the motherboard, 1 in the middle and 1 at the end. Plug the end cable into your first HD (the one with the operating system on it) and the middle connector to your new HD. Finally, connect a power cable to both HDs. It doesn't matter which, just find a spare one. (They have 4 wires going to them: red black and yellow) Turn on your computer! Windows or your operating system should pick it up.
With SATA hard drives it is easy: just plug the second one in at any spare SATA connector: the SATA connectors are thick pink wires. You'll also probably need a SATA power convertor which changes the standard power connectors to one for a SATA drive. You may need to change settings in your BIOS to tell the computer which drive has your OS on it, but that shouldn't be needed. If you do have to, hold DELETE when your system boots. You should find a blue screen with options on it. Look for something like "Advanced Config." -> "Boot order" and set your old HD to be before your new one. Press F10 to save and quit.
I've linked to two sites which might help you: they have the same sort of guide but with pictures and a bit more detail.
Oh yes. Mine has 2 in it right now. Just be aware that you may have to manually assign drive letters (c:/, d:/, etc).
<><><>
Modern desktop computers can accommodate six hard drives at the moment.
Also Make sure you have enough SATA/IDE Interface ports on your motherboard and that your HD jumper/BIOS settings are correct.
the hard disk one of them have master
harddisk
both are magnetic devices and work in the same think
The same way people need blackboard. To jot specific thing down so they can be manipulated and retrieved faster with the context intact instead of trying to do everything with your brain. When the process finish the blackboard is cleared. If a brain is the CPU and harddisk, the blackboard is the memory.
are they physically harassing you? then no
A remote terminal is a computer connected to a network, but is not physically in the same building as the rest of the computers on the network. For example, it might be a computer at the home of a business employee, connected over a secure link to their place of work.
No, multiplayer stats are stored on the server.
it's the same question but mentally stimulated & physically fit is my description
If it is the same computer, then the users are presumably physically accessing the computer. The low-tech approach would be to use a post-it note. Electronically, there are many ways to accomplish this. You might have a logon script that checks a certain file for information and then displays it on the screen for a user, you might schedule a task to be run at a certain time, etc.
Physically attracted to both must mean Bisexual, as this need not require emotional involvement.
It stays the same - Computer is Computer.
Are they alive? Yes. They have a heart, physically and emotionally, same as you and I.
Physically all the electrons are similar.