look inside your car door. or at an auto parts store
If the window motor is not running to raise the window, then several things need to be checked to fix the problem. Check the fuse, switch, wiring, and window motor to find which part is bad and needs to be replaced.
How to remove the window motor from the regulator
A electric motor that moves the (window) wiper to clean the window.
Remove the inside door panel of your 2002 Chevy Cavalier. Remove the window motor wiring harness. Remove the window motor linkage. Remove the window motor retaining bolts. Reverse the process to install the new window motor.
Remove the inside door panel of your 1994 Chevrolet Corsica. Remove the window motor wiring harness. Remove the window motor linkage. Remove the window motor retaining bolts. Reverse the process to install the new window motor.
I asssume you are talking about a power window on a vehicle. To find out if the problem is electrical or not, turn the switch to up and down positions and listen for the whirr of the motor to see if the motor is working. If you can't hear the motor runniing, the problem is either the motor or an electrical connection (fuse, wire, etc.). HINT: If you can't hear it, try a window that does work just in case the motor runs so quiet that it can't be heard. If the motor works, most likely the window has jumped off the track. For either repair, the door panel will have to be removed.
The Oldsmobile Cutlass Cierra window lift motor is located inside of the door. Each window is equipped with a window lift motor.
Begin by removing the inside door panel of your 2001 Mercury Villager. Remove the window motor wiring harness. Remove the window motor linkage. Remove the window motor retaining bolts. Reverse the process to install your new window motor.
bad power window motor
The drive gear is broken in the window motor. Remove motor and install gear kit.
you can get it from a junkyard for like 5 bucks, any 240sx window motor will work. dont go to a dealer because I went and they tried to charge $100.
when replacing motor what position does the window need to be in?