High Standard Manufacturing Corp.
barrel/receiver
Check the barrel and receiver.
Check the receiver and barrel.
On my 1950s vintage Ithaca Model 37 16 gauge it is on the right side of the end of the receiver where the magazine tube and barrel go into the receiver, and also on the barrel adjacent to the number on the receiver. The numbers should be the same on both the barrel and receiver unless the barrel is not the original barrel, at least on mine they are.
Made for Sears Roebuck by Stevens. There may be a model number on the right side of the receiver (most likely 5000, 5100, or 311) or a Sears product number on the barrel (101.6?) which could give an approximate date.
Check the receiver and barrel
Yes, you can remove the barrel of a model 66 Shotgun!
between the stock and the barrel
Best is take it to a gunsmith as the 94 receiver can be damaged if not done properly. The gunsmith will use a special receiver support which is wedged inside to support the receiver sides. He will then simply clamp the barrel and turn the receiver part.
Barrel or receiver or both.
The receiver is the frame of a firearm- in modern firearms, it is the part that the barrel connects to. Antique firearms, such as muzzle loading rifles, did not have a receiver- only the lock, stock, and barrel. (Yes, that is where the expression came from) On a modern firearm, if it has a serial number, it is stamped on the receiver. By US law, a receiver IS a firearm- everything else is parts.
Well, no.... not if the receiver is chambered for 30-06.