follow where the coolant line go to . where it end there should be a hub looking shape. Like an egg. The thermosats in inside it.
how do u find and replace a 92 acura legend thermostat
To locate the thermostat on a 1998 Acura Legend, first ensure the engine is cool for safety. The thermostat is typically found at the engine end of the upper radiator hose, where it connects to the engine block. You may need to remove the hose and the thermostat housing bolts to access the thermostat itself. Always consult a repair manual for detailed instructions specific to your vehicle model.
Behind the ash tray.
Do a Google search for it.
Follow the upper rad hose from the rad to engine and it is in a housing on the engine.
Replacing a thermostat on a 1999 Oldsmobile Cutlass is very easy to do. First you will find the thermostat by following the upper radiator hose. It is under the exhaust crossover. The thermostat has two 13 mm bolts holding it in place. Take the bolts off to remove the thermostat and replace with a new one.
The thermostat is located where the hose leaves the engine to go to the top of the radiator. You unscrew the bolts holding the hose mounting to the engine. There you find the thermostat.
You should check your Toyota Tacoma's owners manual. There should be a diagram for the location of your thermostat.
On a 1996 Acura RL, the thermostat is located at the engine end of the upper radiator hose. To access it, you need to remove the hose and the thermostat housing, which is typically secured with bolts. Make sure to drain some coolant before starting the work to prevent spills. Always refer to a repair manual for specific details and torque specifications when reassembling.
When replacing the rear turn signal on a 1999 Acura Integra open the trunk. Locate the rear turn signal housings and find the bulbs. Remove and replace the bulbs.
How to change thermostat: Drain coolant by removing drain plug on radiator. Locate lower radiator hose and follow it to engine block. Pull the hose from engine block to expose the fitting/thermostat cover. This fitting is held on with two 10mm bolts. Remove to expose thermostat.
Drain all the coolant from the radiator. Disconnect the upper radiator hose from the engine. Remove the aluminum thermostat housing. Should be held in place with 2 bolts. There you will find the thermostat.