To locate the thermostat on a 1998 Acura Legend, first ensure the engine is cool for safety. The thermostat is typically found at the engine end of the upper radiator hose, where it connects to the engine block. You may need to remove the hose and the thermostat housing bolts to access the thermostat itself. Always consult a repair manual for detailed instructions specific to your vehicle model.
how do u find and replace a 92 acura legend thermostat
You can find a fuse layout for a 1998 Acura EL in the vehicle's owner's manual. You can also find it at auto stores.
You can find a fuse diagram for a 198 Acura EL in the vehicle's owner's manual. You can also find it at specific auto part stores.
It's in the Bazaar, near the items girl.
The thermostat is located top hose coming out of the radiator. You will find two bolts mounted on the intake.
You will find the thermostat on the passengers side of the engine where the top radiator hose goes into the engine.
Follow the upper rad hose from the rad to engine and it is in a housing on the engine.
Hi...you can find all the required Acura Parts here http://www.theautopartsshop.com/auto+car-usa+parts/acura+integra+disc-brake-pad.html
look for the leak and you will find the problem, it could be a hose, thermostat, heater core, radiator, water pump(most likely), head gasket. check them in that order
If this is a 2.8 V6 the thermostat is located on the front of the engine. Ask 'Where is the thermostat located on a 1995 Audi A6?' on this site and you'll find someone has done a great job of explaining how to find and replace the thermostat.
On a Mitsubishi Galant, the thermostat is located in the thermostat housing. Find the upper hose on the radiator and follow it to where it's connected at the engine and you'll see the housing.
On a 1996 Acura RL, the thermostat is located at the engine end of the upper radiator hose. To access it, you need to remove the hose and the thermostat housing, which is typically secured with bolts. Make sure to drain some coolant before starting the work to prevent spills. Always refer to a repair manual for specific details and torque specifications when reassembling.