Despite the television being off, if there was an electrical current that overcharged the fuse that it was joined to, it may still have overloaded the television's circuitry. While it is possible to fix the most common possible problem oneself (a melted fusing of a wire attaching the tube to the main circuit) it is highly recommended that the television be brought to a licensed repair shop.
Sounds like the tv blew its picture tube. It needs replaced.
Just restart your laptop!
The computer screen could have becomed damaged and so might the computer.
A See Through clear black screen somehow has the colour pigments of red yellow and green. The Screen themselves are made of some kind of focil fuel. but any any case if you use any black type substance is will have colours naturally inside them. The Strange thing is, its the colours that create the black screen, the screen itsleft is not black, but it is made of all the colour pigments. Then all you have to do is activate the colours of the screen by allowing Different electrical signals into them, the best way that works is through a Plasma Type Liquid which is held inside a second white screen. The Colours are at the front of the tv which make up the black or gray image, and the main white screen sends different signals of white light to the colours. Its also not to difficult if the information in the signal is compressed and the with some type of lense the like the Plasma liquid. The Plasma liquid slows down the electrical signals and redistributes the Electrical signals to the Colours if the Gray black screen. So the Plasma liquid captures Compressed electrical signals and they spread through the area of the plasma liquid at all angles, so potentialy you can have any shaped tv you want with a Plasma Screen, Because the Electrical signals Redistribute to all angles of the screen, Its The Central Part of the Plasma Screen That has The Perfect recorded Signal as Electricitc Works Best when Traveling In Straight Lines.
How can you see the answer? YOUR SCREEN IS BLACK!
You have a power button on your monitor or your screen and if you press it only the screen goes black.
If you get a black screen after installing mods, then it is a compatibility or incorrect install problem. If you get a black screen normally, force an update and this will probably fix it.
Press the no-show button of just freeze it to a black screen.
keep charging i had ds bottom screen turn black
Well, I've had that problem also but instead it was with an old Toshiba Notebook Thinkpad. It most likely that inside the hinges where the screen closes the wires sending the signal to light up the screen or to just turn it on are "kinked" or badly twisted or notted. You should take it somewhere to get the wire's replaced or if possible the wires de-notted or untangled.
A refurbished HP Black 15.6" or a Toshiba 15.6" Satellite.
the code is 020DE16C E1A00000 020D3FA8 E1A00000 PUT IT ON ACTION REPLAY AND RAW IN NO$GBA EMULATOR
yes