How can you get directions for putting together a Gemmy 15 ft inflatable Santa in a Hot Air Balloon?

Answer 1

Here are the assembly instructions:

1. Remove contents from packaging. Lay out all parts and deflated Airblown Inflatable in a clear area.
2. Locate square base, which contains the center support for Santa, and insert L-shaped Stakes into ground (see photo #1).
3. Insert the Short Poles to each corner post (see photo #2).
4. Attach the Mid-Section on top of each of the short poles (see photo #3).
5. Insert the Longer poles onto the corner post of the Mid-Section (see photo #4).
6. Check zippers on both the back of balloon and at base of fan to insure they are properly zipped up.
7. Carefully place the Top Structure with Airblown Inflatable unit on top of the 4 posts of the Mid-Section. This action may require two people (see photo #5).
8. Unzip the zipper on the back of Santa and connect the 2 support poles together (see photo #6).
9. Making sure the air-tube connecting the fan unit to Santa is not twisted and preventing proper airflow, place Santa on the center of the square base.
10. Ensure that Santa is facing forward, while the fan power-cord is in the back.
11. Run the Tethers located at each corner (4) of the square base up and attach to the Top structure.
12. Attach tethers between Santa and the Midsection structure.
13. Plug into receptacle or other outlet device to inflate your Airblown Inflatable.
14. Once the Airblown Inflatable is fully inflated, insert spiral stakes into ground and attach the tethers (see photo #7).
15. Place Santa's glasses on his face.
16. To deflate, unplug fan. For faster deflation, unzip zipper on back of Santa and/or back of fan.

These are copied from the related link below, which has the associated photos and other instructions. Please see the related link for other safety-related warnings as well.