If you can see no external screws then you access it from the backside. There may be a panel you must remove first.
There are 2 screws on the hatch side, remove them and on the "outside" or body side of the lamp there are 2 studs on the back of the lamp that push into female clips in the body, so you should just be able to gently pry the lense assembly out. I use two screwdrivers. They snap loudly when they come out and also snap loudly when you are putting it back on. Make sure you push hard enough to hear the snap.
Maybe is the fluid brake that is low level.
how to change a brake light on 2002 Nissan altima
Yes.
how to change the rear tail light bulb on a 2004 Nissan maxima
how to change a rear break light on a 1998 nissan frontier four cylinder?
The light assy has to be removed and the bulbs removed from the back.
How to replace a brake light on a nissan Tiida hatch back.
antilock brake system malfunction sensor in wheel probably out of spe or simialar have abs looked at by a qualified technician
No it doesnt have 1. U just have ro set 1 of ur trips to know when to change it again
how to change the brake light in a Nissan frontier 1999
why or how do i find the brake light switch on my 1997 nissan 200sx. how do i chane it out.
On my 2002 Nissan Xterra I had to remove 4 screws from the front bumper and wheel well and then I was able to get to the back side of the side marker light and remove the nut in order to get to the light bulb. i don't need to change just the bulb. The entire light assembly must be replaced. The reflector is broken. i cannot get wires to release.