answersLogoWhite

0


Best Answer

Try adjusting clutch cable. 5 minute job. Worked for me after weeks of suffering with the gear change from Hell on a used Matiz.

User Avatar

Wiki User

16y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How can you improve the notchy gearchange on a 1999 0.8l matiz?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Where is the ecu on a Daewoo matiz 1999?

where is the ECU on Daewoo Matiz 1999


What would be the reason for an engine check light to come on on a 1999 Daewoo Matiz?

i had the very same problem on my 1999 matiz,it was a broken wire on the fuel injector.(i'd changed the distributor cap,fuel filter,plugs etc before finding out it was this)hope this helps.


Where do you find the airbag module on a 1999 daewoo matiz?

it's underneath the handbrake/ gearstick console between front seats.


Where is the water pump located on daewoo matiz 1999?

open the upper timing belt cover the first thing lower to crankshaft is water pump.


What happens when a daewoo matiz 1999 cambelt snaps is it anon interferance engine?

Camshaft will be broken and inlet/outlet valves will be damaged. engin must be rebuilt or replaced.


What is the paint code for the Daewoo Matiz color golden yellow?

51U provided it is the M100 model 1999-2004 i think, they only do one colour of golden/yellow for this age


After how many kilometers do you need to change your cam belt on your 1999 Daewoo Matiz?

I see no listing for the Daewoo Matiz. Other Daewoos are all Interferance engines, and as such if the belt breaks severe engine damage will occur. Here are other Daewoo models and the specs in miles for belt replacement. Find your engine and it will be the same. Lanos 1999-02 1.6L 4-Cyl. (DOHC) 60,000 Federal 102,000 Federal Leganza 1999-02 2.2L 4-Cyl. (DOHC) 72,000 Federal 102,000 Federal Nubira 1999-02 2.0L 4-Cyl. (DOHC) 72,000 Federal 102,000 Federal


You are looking for the torque settings for big end bearings and main bearings on a daewoo matiz?

Main bearings torques on a Daewoo Matiz 800cc (1999) Stage 1: 25-30 Nm Stage 2: 55-60 Nm Big End Bearings torques Stage 1: 10-15 Nm Stage 2: 30-35 Nm


What is the correct tire pressure on a Daewoo matiz?

The recommended tyre pressures for a 1999 T reg. 0.8 SE Daewoo Matiz, according to the plate by the drivers (R/Hnd drive) door jamb is; 30 psi. (2.1 bar) front and 30 psi. (2.1 bar) rear, up to 3 passengers. 30 psi. (2.1 bar) front and 34 psi. (2.3 bar) rear, full load. Hope this is useful to someone!


Daewoo matiz 1999 broken cambelt?

The 800cc engines are NOT non interference engines. I recently bought a matiz with a snapped cambelt. After reading online that it was a safe engine I simply reset the timing and fitted a new cambelt. The car seemed to run fine so I thought I was in the clear. 12 miles later one of the valves snapped and killed the engine, lots! I stripped the engine down after I'd removed it from the car and found that 5 out of 6 valves were bent.


How do you change and adjust the alternator belt on a 1999 Daewoo Matiz SE?

quite easy it has a slide bracket on alternater slide one way it is loose slide the other way it will tighten. quite easy it has a slide bracket on alternater slide one way it is loose slide the other way it will tighten.


What is the average fuel consumption of lumina 3.1 lit engine and how to improve it?

I had a 1999 Chevrolet Lumina with a 3.1 liter engine and the average I drove was 29 miles per gallon. I have never encountered a way to improve getting better mileage. It just really depends how a person drives.