Energy is the source of voltage
Yes.Source transformation in dependent voltage source can be solved the same like independent voltage source
when the magnitude of voltage of a source is controlled by another small voltage source in the circuit the former is called voltage controlled voltage source and the later is called controller voltage source.
The voltage source is the source of the electricity. The conductor is what the electricity flows through to reach its destination. Example: A battery is a voltage source and an electrical wire is the conductor.
A current source varies the output voltage to maintain the desired current. A voltage source has a constant output regardless of the current draw (up to the capacity of the supply, of course).
A voltage source is anything that provides a voltage; for example a cell or battery, or an electrical outlet in your home.
A: To get voltage you must have resistance to measure across. Voltage only exists if the there is current and current and it only exists if there is voltage. To get voltage measure the resistance and divide by the current. It is a relationship called ohm laws.
The first thing you need to know is the internal resistance of the current source, the voltage source will have the same internal resistance. Then compute the open circuit voltage of the current source, this will be the voltage of the voltage source. You are now done.
The incoming voltage from the source to the transformer is called primary voltage.
Drain-to-source breakdown voltage (BVdss) should not change appreciably until the gate-to-source voltage (Vgs) approaches the device's threshold voltage (Vth). In that case, the drain to source voltage becomes the product of the drain-to-source current (Ids) and the device's on-state resistance (Rds-on) at the given Vgs.
A voltage controlled source is a passive energy source whose magnitude and direction in the circuit is controlled by a voltage source in any other part of the circuit. Similarly the current controlled source is controlled by a current source. So any devices controlled by voltage source and current source are called voltage devices and current devices respectively.
The battery is the voltage or power source, the wires form the conductor.