== == Follow the positive battery cable down from the battery until you hit the relay. The starter relay is located next to the battery. On the positive battery post, (red) you will see 2 red wires, one thicker than the other one, The thicker one connects to the starter SOLENOID which is attached to the Starter, while the thinner of the two wires off of the battery goes to the starter RELAY, which is where you will find your alternators B+ charging wire, and your connections for fuel pump ballast resistor,starter solenoid, ignition terminal and ground terminal. All the wires connecting to the Starter relay are connected with spade terminals and use FUSIBLE LINKS between the actual terminal and the red wire. The FUSIBLE LINKS are your protection for that circuit, and should not be replaced with regular wire at any cost, but replaced with a new piece of FUSIBLE LINK of the same gauge as the one removed.
The starter relay is built on the starter.
back side of the starter its self
Jeep does not have one could be the relay or bad pump.
Its one of the wires coming off the positive (+) terminal of the battery. Don't burn yourself on the exhaust manifold
Where is the ASD relay located on a 2000 Jeep Cherokee 2WD ?
It is on the starter.
Where is the windshield wiper relay located on a 1996 grand jeep Cherokee
It is on the starter.
location of relay for heated o2 sensor 1999 jeep Cherokee sport
The starter is on the lower passenger side of the engine.
The solenoid is built on the starter.
The 1990 Jeep Cherokee electric fan relay switch is located on the firewall in the engine compartment. The fan relay switch will be on the passenger side of the firewall.