Unfortunately, you are in a bad situation. I am assuming that your Fiero is equipped with the decklid release button, where you can push it and the decklid opens and you don't have a key.
First, call a locksmith over and have them make a copy of the key for your doors. Expensive, but the safest. The decklid lock and your door locks SHOULD use the same key, unless someone has changed them out over the years.
The second option is that you will actually have to break into the "trunk" (decklid). This can be done by removing (destroying) the outer portion of the lock and removing it. Inserting a long flat head screw driver into the hole, working it in, and turning it will pop the trunk. Unfortunately, you will have to do this everytime to open it or replace the lock.
The only other option you have is that you can sometimes 'jump' the solenoid for the trunk release from under the car. I unfortunately do not remember it's exact location, but wiring diagrams are available online. If jumped from a fresh battery, you can pop it and it will open.
Source: Fiero owner for ten years.
my uncles 84 fiero only opens with keys. My Fiero has a button on the top right of the gauge cluster that will open the trunk. It has to have a battery or the engine running to do so though.
How do you open the trunk in a 2010 toyota Pirus if dead battry
Surely there is a place to insert and use a key to open the trunk.
Use you key.
Use the key
With the key?
With your key.
use the key
Remove the rear seat.
Replace the battery or jump the battery.
1. you can pry it open (but that can get costly). 2. you could jump start the battery. 3.use your key.
Put your key in the trunk lock and turn.