If you let the concrete dry on the ceramic, they have bonded. You can try to chisel it loose.
The best thing to use to remove aerosol residue from a vinyl floor is baking soda and water. Lemon juice can also be used.
Yes on wood, no on smooth solid concrete
Ensure concrete is clean, smooth and dry. Concrete should be first cleaned with degreaser to remove any residue. Use a self leveling compound if floor is not level or has some low areas. Fill any cracks or holes prior to using leveler. Allow leveler to dry overnight and seal concrete the following day to prevent moisture from wicking through concrete. Install flooring of choice.
You can freeze it with a ice cube and then scrape it off with a putty knife.
Bead blast or score the concrete first anything from a wire brush to a floor sander might work...be VERY CAREFUL with the dust though
The polishing pads, the cleaning pads, the scrubbing brushes and the cleaning cloth are the parts of a floor polisher. A floor polisher is used to clean a variety of the floor types namely the parquet wood, the ceramic floor coverings and the concrete floors.
You can remove oil paint from ceramic floor tile by using paint thinner. Wet a soft cloth with paint thinner and rub it over the paint stain until it is removed.
Spray Windex on floor and mop it up with a mop. Or put Spic and Span in mop bucket and mop it up.
Scrape off carefully with a very sharp craft knife with blade held almost parallel to the floor.
It depends on the contractor in Lexington you're looking at and they type of ceramic tile. If you already have the tile it'll be cheaper but the floor arrangement can raise the price.
can you mix ceramic and porcelain tile on a bathroom floor
I would use a latex screed. like cement but with a latex binder, add water pour 5- 10mm on to the concrete and it self levels.Dries in about a day.Put a poylthene membrane down first if damp is a problem