Credit this one to ID3461356577:
"try oxi clean with baking soda or just oxi clean if that doesnt work you cant remove it."
If you want to remove permanent marker from vinyl:(not metal)
Use a dry erase marker to write over the permanent marker. Get a damp cloth and wipe it away.
This will also remove permanent marker from porcelain tile and probably a lot of other surfaces.
Any other website that tells you to use alcohol, wd-40, nail polish, etc. doesn't know what they're talking about.
I have found nothing to get permanent marker off of anything. That is why it is called permanent. It stays.
Acetone! And elbow grease. It is the only thing that worked when my son & the neighbor kids colored on my front porch.
Its In the washer bottle which is located inside the front wing. remove wheel and wheelarch liner to gain access to it.
Front marker lights can be changed by removing front headlight assembly. To remove pull up on two metal clips behind light assembly and unplug wires. The side marker lights are now accessable. Turn bulb socket ccw to remove.
remove the drivers side front wheel, then remove the wheel arch lining, the washer bottle is located to the upper right handside, to remove it you need to remove the bolts one of which is behind the indicator
u need some card bored and glue and scissors and and permanent marker and front and back image
In the front wheel well there are platic screw latches that hold wheel well coul in place. Remove the front ones to gain access to side marker light compartment.
Remove the plastic front and it will be visible just under the right side headlight. Lodged in the washer fluid container.
There should be a screw located inside the hood on top of the front side marker housing. Once you remove the screw, start pulling it forward (the direction of where the vehicle is facing). There should be a screw located inside the hood, on top of the front side marker housing. Once you remove the screw, start pulling it forward (the direction of where the vehicle is facing).
The difference between a front load washer and regular washer is that a front load washer has a door in front were clothes are loaded and that is also where washer settings are located. The regular washer is usually a top load where clothes are loaded on top of the washer.
To remove the front window washer bottle on a Nissan Pulsar, first, ensure the vehicle is off and the keys are removed from the ignition. Locate the washer bottle, usually found near the front of the engine compartment. Disconnect the washer fluid hose and any electrical connectors, then unscrew any bolts or screws securing the bottle in place. Finally, gently pull the bottle out of its mounting position.
The windshild washer pump is located on the washer fluid tank under the battery on the passenger side (front). You'll need to jack up that side & remove the passenger front tire. Then, remove the inner fender liner (reuseable fasteners). The pump is then accessible as it's mounted on the tank.