Want this question answered?
Yes they do. In fact the rear bench seat comes out as well. Underneath each middle seat is a T-handle that you must lift vertically to unlock and then push to the rear of the van to unlatch. Then simply tilt the seat back and lift up to remove. The rear bench seat has 2 latches, one on either side at the rear close to the bottom. Lift the latches vertically then tilt the bench seat forward and lift up to remove.
yes!
There is a lever on the left side of the bench seat. Pull up on the lever while pushing down on the top half of the bench seat.
yes
Drivers and passengers front seats. Midship bench or captain. 3rd bench or no 3rd row bench.
no but it is able to fold down
I removed the bench seat by removing the seat tracks...4 bolts on each side beneath the carpet. I just use the the 2 rear bucket seats now and take them out when I need the room for cargo. Saves about 150 lbs which gives better performance as well. You could also take the tracks to a machine or welding shop and have them cut off the rear of the tracks where the stops prevents you from sliding the bench seat out. I thought of that but really haven't found the need for the 3rd seat, so I'm sticking to the former approach. ----- 1 - remove the middle row for easy access 2 - remove the 6 bolts attaching the seat to the sliding brackets 3 - remove bench seat from van. It is very heavy. To remove sliding brackets: 1 - remove trim piece by sliding door or cut away carpet 2 - remove captains chairs in the front seat 3 - unscrew the wiring harness and heater vent 4 - lift carpet & wiring harness while sliding the seat bracket off the track. 5 - repeat on other side 6 - reassemble everything.
The back bench seat has a lever on each back leg of the seat that you have to lift up on to release the legs, then you just pull the bench towards the back of the van. That'll unlatch the front legs. The middle captain seats are just bolted down with 4 nuts each seat.
I need to remove the front seat to my Vauxhall combo van to replace the seat belt clip, the is Van on an N Plate it's a Vauxhall COMBO 1.7. Many Thanks
No - because from the factory bucket seat vans have an extra set of floor anchors that the bench van will not have. Answer In my 2001, there are both sets of floor anchors in the middle seat position to accommodate both style of seat anchors.
My back bench needs only pull forward on the seat as you push the back of the seat down toward the back down, results in flat out bed.
You can not remove the third seat. You can remove the second seat and slide the third seat into it's position to get more room in the back. You can also put the third seat in the upright position and move it all the way to the front for more cargo room.