0
What else can I help you with?
Routing for serpentine belt on 1997 grand prix with the 3800?
There is a picture in the motor compartment.
How can i bypass the power steering pump in a 97 grand prix gtp when routing serpentine belt?
A smaller belt
What does the serpentine belt on a Pontiac gtp run?
i have a 98' Pontiac grand prix gtp. i got the 2 serpentine belts replaced for $200.
Will a serpentine belt change on a 90 Pontiac grand prix require removing engine mounts?
Absoultly not.
What is the serpentine belt diagram for a 2007 Pontiac grand prix?
Should be a placard under the hood somewhere with a diagram of the belt routing. If it is missing then look in your owners manual.
Why is your 2000 grand prix serpentine belt shredding and squeaking?
Mine isn't squeaking. Yours is because your pulleys aren't aligned or because you are using an improper belt.
How do you replace the serpentine belt on a 3.8 Liter - V6 2000 Grand Prix GT?
look how it is routed before removal. There is a tensioner that holds the belt tight. Use a wrench to hold the tension off the belt while you pull the out from under the tensioner. install new belt the same as old.
How do you replace a serpentine belt on a Pontiac grand prix GT wit a 3.8 liter engine?
The serpentine belt can be removed by using a rachet/socket and turning the spring loaded tension pulley clockwise. Reverse the order to install the new one. (The pulley should be somewhere in the top/middle section of the drive area.
How do you replace a water pump on 2001 Grand prix?
How do you replace a water pump on 2001 Grand prix?" How do you replace a water pump on 2001 Grand prix?"
What is the sherp belt from a 1999 grand prix se?
Do you mean the "SERP" belt as in the serpentine belt that drives all the power steering. water pump, A/C and alternator pulleys. Hope this helps "G"
Will a 1996 Pontiac grand prix run without the serpentine belt?
Yes. Not for long. The water pump, and alternator are driven off of the serpentine belt. If you remove it, your car will prolly die from lack of electrical power before it overheats. If you are removing it because of something not there, I.e. A/C Compressor you can buy a shorter belt for the non-A/C model, or you can get a "dummy" idler pulley to replace it.
What size socket do you need to change the serpentine belt on a 1998 Grand Prix GT Which engines use the 93 inch belt and which use the 93.5?
5/8" ratchet works fine
