You can't. The current code SHOULD be located on the underside of the trunk lid on a sticker that contains just the 5 numbers. Barring that:
You can try to replace the DDM (Driver's Door Module) located in the driver's door. Access to it requires the driver's door panel to be removed. Due to the age of your vehicle, it is unlikely that you will be able to order a replacement. It also wouldn't be cheap. Other than disabling your keyless entry system altogether, your best bet is to call your local automotive salvage yard, to see if you can grab a used one off another '92 or later Crown Vic/Grand Marquis. The five digit code would be written on a label on the module, along with a bar code and engineering part number.
Open the trunk and look at the trunk hinge, the code is there. If it isn't you will need to go to a Ford dealer so they can reset the code.
inside the car
I have a Acura Integra LS 1995 with an Acura Stereo, I have the Code but I can Not reset it , what are the steps to reset it? please help me ...
Underneath the trunk lid
Code p0430
To reset the keyless entry code, you need to first enter the factory programmed code. Once entered, press the '1-2' button within five seconds of entering the last digit. You can then reset the code to your own. You will need to be extremely quick.
the door code number is on a sticker inside trunk lid
look on the trunk hinge there should be a sticker with the code on it
You can't. It's factory set and cannot be changed.
You won't know until you get the code read.
Look on the trunk lid support arm.
You will find it on the right hinge of the trunk