How can you prevent mold growth on wood?

Answer 1

While mold spores are all around us, mold growth can be prevented. As mentioned earlier, mold growing in your home requires MOISTURE, WARMTH, and FOOD. Depriving mold of any of these three items will stop it from growing, but it will not kill the mold that is already there. Mold spores will remain dormant, and if the moisture, warmth and food all reappear, mold will begin to grow again.

The most important steps in controlling mold growth are to clean any existing mold and to eliminate excessive moisture. You can take numerous precautionary steps:

Vacuum and clean regularly to remove possible sources of mold growth. Pay special attention to bathrooms and other areas of your home that are likely to generate a lot of moisture.

• In portions of your home that are susceptible to moisture, use area rugs or washable floor surfaces rather than wall-to-wall carpeting. If you use area rugs, launder them periodically.
• Do not store materials such as paper, books, clothes, or other possible sources of food for mold in humid parts of your home.
• Repair water leaks in your roof, windows, or any other part of the home as soon as possible.
• Clean refrigerator drip pans regularly according to the manufacturer's instructions. If your refrigerator and freezer doors do not seal properly, moisture can build up and mold can grow there. Remove any mold on the door gaskets and replace faulty gaskets.
• If you live in a house, make sure that your gutters and downspouts are clear of debris that may block the flow of water from your roof. Make sure the area under your downspouts is properly graded so that rainwater from the roof flows away from your foundation. Splash blocks can help rainwater to flow in the proper direction. If necessary, extend your downspouts.
• Make sure other areas around your foundation are graded so that rainwater does not flow toward the house. Do not put gardens or plants too close to your foundation so that watering them could cause water to flow toward your house. If you water your lawn with a sprinkler, make sure the water does not hit your house or the area next to the foundation.
• In the kitchen and bathroom, open windows or use exhaust fans when engaging in activities that produce moisture. Exhaust fans should be vented to the outdoors and not to an attic or crawl space.
• If you have a clothes dryer, make sure it is vented to the outdoors.
• If you use a humidifier, make sure it does not produce an excessive amount of humidity. During the summer, 60 percent relative humidity or lower probably will prevent condensation and mold growth in most parts of the country, but that is too moist for the middle of winter, when 40 percent relative humidity or lower will prevent condensation on windows.
• If you live in a house with a basement, consider using a dehumidifier there. The cool basement floor and walls can be a source of moisture build-up.
• If your home has an attic, make sure it is properly insulated and ventilated.
• If you have a crawl space under your house, cover the soil in the crawl space with waterproof polyethylene plastic. If your crawl space is ventilated, close the vents in the summer and keep them open in the winter.
• If you have water problems in your basement or crawl space, clean up affected areas as quickly as possible and take immediate steps to resolve the source of the problem.

Answer 2

It depends on where the mold is growing. Mold grows in dark, moist conditions, if you can eliminate those you should have no problems. Bleach is very good at eliminating mold but it will eat through the top cover of most porcelain tubs and sinks over time..

Answer 3

One can expose a nutrient agar plate to the air for ~30 minutes. Within a couple days, there will be visible fungal colonies, if there are spores in the air. (There are always spores in the air.) One can also inspect air filters for spores with a microscope.

If you think there may be mold growing on a surface, the best way is to visibly inspect the surface and prepare a microscope slide of anything found growing on it.

Answer 4

The first step to controlling mold in residences and buildings is to appreciate how mold is formed. Mold grows and reproduces by way of minute spores that are invisible to the naked eye. These spores are always around and are incessantly floating in the air. These spores are relatively risk-free unless they land on damp or moist surfaces, which will cause them to grow and reproduce on whatever surface they are on, forming the noticeable mold we are accustom to.

Next it is very important to see the source of moisture that created the environment for the mold to grow in the first place. Look for leaking pipes, sinks, windows or other areas where water or dampness is coming from. Once the source is identified, right away have the problem resolved either by a specialized or a capable repair person so that future leaks or moisture tribulations can be prevented.

Answer 5

There are anti-mold and mildew sprays you can buy at many hardware and home improvement stores. you can also varnish or paint the wood with anti-mold and mildew brands.

Answer 6

refrigerate after opening