To remove the back seat from a 2006 Chevrolet Malibu, start by locating the bolts or clips securing the seat bottom. Typically, you’ll need to lift the front edge of the seat bottom to release it from the retaining clips and then pull it out. For the seat back, check for any bolts at the base or along the sides, remove them, and then tilt the seat back forward to detach it from the vehicle. Always refer to the owner’s manual for specific instructions and safety precautions.
unscrew the bolts and take the seat out
how do you take the dash board outon a 2006 chev Malibu
the rear seat back will probably have to come out and then you have to take the rear package tray out to get to the bolts holding the speakers in.
To take off the das in 2006 Chevy Malibu you need to take both the IP and end panels off by unclipping them on place. After that, remove the 7mm bolts that hold the driver knee bolster in place.
The cast of Take a Seat - 2006 includes: Tod Fennell Marc James Beauchamp Brett Watson
5w-30
pull the seat base out and then you will see 2 bolts that hold the seat back down to the floor, take the bolts out and the back will come out.
there should be two bolts behind the passenger seat, take those out. pull the strap on the passenger seat forward and pull the seat back. after you take the passenger seat off you can see the bolts for the front seat, take them off and back the seat out of the lip.
To remove the back seats of a 2006 Ford F-150, start by locating and removing the seat bottom. This usually involves pulling up on the front of the seat to release any clips or bolts. Next, to remove the seat back, unscrew the bolts at the base and/or detach any clips securing it to the truck's frame. Finally, lift the seat back out of the cab, being cautious of any wiring or connectors.
Take out the bench seat, and remove the back, take a look. Holes are small.
I don't know if you're still looking for an answer, but check out redlineforums.com... They have a how-to posted in their forum on this.
very carefully