Check it for continuity with an OHM meter.
What ever circuit that fusible link protected would be dead if the fusible link is blown.
If the fusible link is made into the wiring it will have to be cut out. The new link will be solidly connected, such as soldering it in, then the connections sealed form weather.
can you tell me where my fusible link is for my 1994 Chevy lumina
blown fuse or blown fusible link.
If you can stretch the fusible link like a rubber band, it is blown.
Check for blown fuse(s) or blown fusible link(s).
Probe the circuit(s) containing the fusible link(s) on both sides of link with a multimeter. You will be able to easily see whether there is continuity or not, an absence of continuity indicates a probable blown fusible link. Good luck to you!
There should be a fusible link on the lead to the starter and possibly one coming from the alternator, if you think you've burned a fusible link you've most likely actually blown the main 150 (?) amp maxi-fuse under the battery tray though.
Get a 12 volt test probe. Ground the clip end to anything steel (grounded) or the negative battery post. Push the probe carefully into the wire on both sides of the fusible link. If the test light only lights on one side of the link, the fusible link is blown or bad.
Replace fusable link (not serviceable). Install new link using same wire routing as old one.
do a 1997 cutlass olds. have fusible link
Where is the fusible link on a 2002 Camry, and how do I change it.