Take off one of the valve covers, if the rocker has a roller tip on the side which it touches the valve spring then its a roller, if no roller tip is present then its a normal tappet rocker.
no such thing as a pontiac small blockstock they rockers were 1.5 ratio
yes
Information on the Pontiac 400 can be found on Wikipedia. The 400 refers to the type of engine that is present in the car. Pontiac began production in 1926.
where do the wires on the starter go on a 1977 pontiac 400
Many ways. Pontiac 400 has a cast aluminum timing cover, that mounts the water pump directly on it, Chevy 400 has a stamped steel timing cover, water pump mounts to the block. Pontic 400 has fuel pump on the drivers side, Chevy is on passenger side. Pontiac has a separate valley cover below the intake manifold, Chevy intake IS the valley cover. Pontiac distributor does not go through the intake manifold, Chevy does. Pontiac has 10 head bolts per side, Chevy has 17. Pontiac has long exhaust ports that bend 90 degrees from the side of the cylinder head, Chevy exhaust ports end at the face of the cylinder head. Pontiac spark plugs are above the exhaust manifolds, Chevy is below. Pontiac 400 is physically larger than the small block Chevy 400 also.
Rpm Red line 1968 Pontiac firebird 400 HO
There really isn't one... 50 Series chain is a 5/8" pitch with a .400" dia roller that is 3/8" wide. I directly equates to a motorcycle 530 chain in size. 520 - 5/8" pitch .400 dia roller 1/4" width. 525 - 5/8" pitch .400 dia roller 5/16" width. 530 - 5/8" pitch .400 dia roller 3/8" width.
.035
Clockwise
Horsepower TV - 2006 Pontiac 400 Build was released on: USA: May 2008
Yes.
no