Want this question answered?
For most vehicles, a small reverse spurt on initial application is a part of normal operation of the internal disc brake adjusting mechanism.
Master Cylinder internal seals are failing. Replace the Master Cylinder before you have an accident when it fails permanently.
Gradual Loss of brake pedal height (pedal sinks to floor)? but fluid level proper--internal leak Loss of brake fluid? Back of master cylinder (where is attaches to booster) wet with brake fluid? External Remove master cylinder and see if booster has fluid in bottom (bad real seal)
A brake master cylinder? If you are losing brakes or brake fluid.
Yes, There are two sets of internal seals and a rear seal. The internal seals can fail and the cylinder will retain the Brake fluid, it just wont work correctly.
i am trying to replace front brake pads on 1995 jaguar xjs 2+2 is there a video on how to do this
The brake valve is located next to the master brake cylinder. The valve can be found just below the master brake cylinder.
As long as you keep it topped up you can drive, but sooner or later you'll have to fix it. If it has internal "blow-by", it would be in your best interest to replace now. Internal blow-by is when the brake pedal sinks to the floor when you are sitting at a red light but you are not losing brake fluid.
Brake master cylinder repair is where someone or some body fixes the master cylinder on your brakes. It is the main line to your brake apparatus. Also the master cylinder is the container for the fluid and the piston, forming part of a device such as a hydraulic brake or clutch.
Master cylinder may be leaking, brake pedal may slowly fall to the floor when you are stopped with your foot on the brake.
The master brake cylinder is under the dash beside the steering colum
Master cylinder empty (no brake fluid) Leak in brake line or wheel cylinder Defective master cylinder